Remove the correct part from the hinge cover (E). Make sure to remove the part DX, in the case of right hinge, SX in opposite case.
D
C
E
E 
B
Attach the covers (C, D) to the lugs and the hinge holes.
Install the vent grille (B). Attach the hinge covers (E) to the hinge.
Ha | Hb | ca. 50 mm |
90° | ||
|
| 21 mm |
Hc |
| 90° |
Hd | ca. 50 mm |
| 21 mm |
Disconnect the parts (Ha), | Install the part (Ha) on the |
(Hb), (Hc) and (Hd). | inner side of the kitchen |
| furniture. |
Ha
Hc
8 mm | 8 mm |
Ha | K |
| Ha |
Hb | Hb |
|
Push the part (Hc) on the part (Ha).
Open the appliance door and the kitchen furniture door at an angle of 90°.
Insert the small square (Hb) into guide (Ha).
Put together the appliance door and the furniture door and mark the holes.
Remove the brackets and mark a distance of 8 mm from the outer edge of the door where the nail must be fitted (K).
Place the small square on the guide again and fix it with the screws supplied. Align the kitchen furniture door and the appliance door by adjusting the part Hb.
Hb
Hd
Press the part (Hd) on the part (Hb).
Do a final check to make sure that:
•All screws are tightened.
•The magnetic sealing strip is attached tightly to the cabinet.
Important! If the ambient temperature is low (for example, in the Winter), the size of the gasket decreases. The size of the gasket increases when the ambient temperature increases.
11