Installation, Positioning, Rear spacers

INSTALLATION

Warning

IF YOU ARE DISCARDING AN OLD APPLIANCE THAT HAS A LOCK OR CATCH ON THE DOOR, YOU MUST ENSURE THAT IT IS MADE UNUSABLE TO PREVENT YOUNG CHILDREN BEING TRAPPED INSIDE.

Positioning

This appliance should only be installed at a location where the ambient temperature corresponds to the climate classification indicated on the rating plate, which is located at the left on the inside of the appliance.

The following table shows which ambient temperature is correct for each climate classification:

SN +10°C to + 32°C

N+16°C to + 32°C

ST +18°C to + 38°C

T+18°C to + 43°C

It should be located in a dry atmosphere, out of direct sunlight and away from extreme temperature e.g. not next to a boiler or radiator, or in a very cold room e.g. an outhouse, where the temperatures may fall below 10°C (50°F). If these temperatures are exceeded i.e. colder or warmer, then the appliance may not operate correctly.

You should also ensure that air can circulate freely around the back and the top of the cabinet. There must also be at least 100 mm (4”) distance between the top of the cabinet and any overhanging kitchen furniture (A). Ideally, the appliance should not be positioned beneath overhanging furniture (B).

There should also be a gap of 25 mm either side of the appliance. Do not obstruct the space underneath. The back of the cabinet may be placed close to the wall but must not touch it. DO NOT install in places with restricted ventilation.

Adjust the level of the appliance by screwing out the adjustable foot, or feet, at the bottom of the cabinet using your fingers or a tool (see figure).

Rear spacers

The plastic bag containing all relevant documentation also contains two spacers to be fitted into special holes in the back of the appliance.

Fit the spacers into the holes, taking care to ensure that the arrow (A) is positioned as shown in the diagram. Then turn them through 45° (arrow (A) vertical) until they lock into place.

Depending upon the position which you choose for your appliance, you may wish to reverse the way in which the door opens. To do this, refer to instructions on “Door reversal directions” paragraph.

Important

It must be possible to disconnect the appliance from the mains power supply; the plug must therefore be easily accessible after installation.

100 mm
A	B
10 mm	10 mm
NP005
D200

45°

PR60

ZETF 180 W, ZETF 180 SI specifications

The Zanussi ZETF 180 W and ZETF 180 SI are remarkable built-in fridge-freezer models designed to meet the diverse needs of modern kitchens. Known for their innovative features and energy efficiency, these models cater to both functionality and style, making them a popular choice among homeowners.

Starting with dimensions, the Zanussi ZETF 180 W and ZETF 180 SI typically measure approximately 177.2 cm in height, 54 cm in width, and 54.5 cm in depth. This compact design allows for seamless integration into kitchen cabinetry. With a net capacity of around 266 liters, the fridge compartment offers ample space for groceries, while the freezer section provides sufficient storage for frozen goods.

One of the standout technologies featured in both models is the No Frost cooling system. This technology minimizes ice buildup in the freezer, preventing the need for manual defrosting. This feature not only saves time but also ensures efficient operation, reducing energy consumption. The refrigerator section is equipped with MultiFlow technology, which maintains consistent temperatures throughout the fridge, keeping food fresher for longer.

The Zanussi ZETF models also prioritize energy efficiency, boasting an impressive energy rating that contributes to reduced electricity bills and a lower carbon footprint. This makes them an environmentally friendly choice for conscientious consumers. Additionally, these models are designed with adjustable shelves, allowing users to customize the interior layout to maximize storage space for taller items or bulk groceries.

Both the ZETF 180 W and ZETF 180 SI feature an easy-to-use digital control panel, making temperature adjustments simple and straightforward. They also come with LED lighting that illuminates the interior, ensuring easy visibility while consuming less energy compared to traditional lighting options.

In terms of aesthetics, the Zanussi ZETF 180 W presents a classic white finish, which complements a wide range of kitchen designs, while the ZETF 180 SI showcases a sleek stainless steel appearance for a more modern look. This versatility in design makes both models suitable for various kitchen styles.

Storage solutions in these fridge-freezer combos include spacious door bins, a salad crisper drawer, and easy-access freezer compartments, which enhance organization and accessibility. With safety and convenience in mind, they also come equipped with features such as a door open alarm, ensuring that energy is not wasted by leaving the door ajar.

In conclusion, the Zanussi ZETF 180 W and ZETF 180 SI are exceptional options for individuals seeking a reliable, stylish, and efficient fridge-freezer combination. With their advanced technologies, ample storage capacity, and modern design, these models exemplify Zanussi's commitment to quality and innovation in kitchen appliances.