Operation

Before using

Remove all securing tapes. Wash inside the appliance with lukewarm water and bicarbonate of soda (5 ml to 0.5 litre of water).

Do not use soap or detergent as the smell may linger. Dry thoroughly.

Setting the temperature

The temperature inside the refrigerator is regulated by a thermostat with 6 temperature positions and one «OFF» (O) position.

Position 1 = minimum coldness

Position 6 = maximum coldness

Turn the thermostat dial to the required position.

The intermediate position is usually the most suitable (3-4).

The thermostat setting can vary as the temperature inside the refrigeration compartment depends on the following factors:

–room temperature

–how often the door is opened

–how much food is stored

–position of the appliance

Important

During prolonged periods of abnormally hot weather, if the thermostat is set on too high a number, the cooling system may operate continuously and the fridge cooling plate may not defrost. Turning the knob to a lower number will cause the automatic defrosting to resume.

Low Room Temperature Switch

When the room temperature is + 16° C or less, the Low Room Temperature Switch, located next to the thermostat control knob, must be switched on to maintain the correct temperatures inside the fridge and freezer compartments.

Please note that in this setting the interior light will remain on, even if the door is closed.

No damage can be caused by leaving the switch in this position for any period of time (see page 10 Low ambient operation). However should the temperature rise above 16°C remember to turn the switch off again.

D710

A - Low Room Temperature Switch

The freezer compartment

The four-star freezer compartment is suitable for storage of commercially frozen food and for freezing fresh foods.

Freezing fresh food

It is not necessary to adjust the thermostat setting when freezing fresh food. Depress the ambient switch at least 24 hours before loading food to be frozen.

In any 24 hours you can freeze up to 3 kg. of fresh food.

Place the food to be frozen on the shelf of the freezer as this is the coldest part.

Important

In the event of a power cut do not open the door. The food in the freezer will not be affected if the power cut is short and if the freezer is full. Should the food begin to thaw, it must be consumed quickly and must not be re-frozen. (See “Hints & Tips”).

Storage of frozen food

When first starting-up or after a period of non use, before putting the products in the compartment let the appliance run for at least two hours on the coldest setting, then turn the thermostat knob to the normal opertion position.

Do not exceed the storage period indicated by the manufacturer.

Finally, do not open the door frequently or leave it open longer than is absolutely necessary.

ZETF 180 W, ZETF 180 SI specifications

The Zanussi ZETF 180 W and ZETF 180 SI are remarkable built-in fridge-freezer models designed to meet the diverse needs of modern kitchens. Known for their innovative features and energy efficiency, these models cater to both functionality and style, making them a popular choice among homeowners.

Starting with dimensions, the Zanussi ZETF 180 W and ZETF 180 SI typically measure approximately 177.2 cm in height, 54 cm in width, and 54.5 cm in depth. This compact design allows for seamless integration into kitchen cabinetry. With a net capacity of around 266 liters, the fridge compartment offers ample space for groceries, while the freezer section provides sufficient storage for frozen goods.

One of the standout technologies featured in both models is the No Frost cooling system. This technology minimizes ice buildup in the freezer, preventing the need for manual defrosting. This feature not only saves time but also ensures efficient operation, reducing energy consumption. The refrigerator section is equipped with MultiFlow technology, which maintains consistent temperatures throughout the fridge, keeping food fresher for longer.

The Zanussi ZETF models also prioritize energy efficiency, boasting an impressive energy rating that contributes to reduced electricity bills and a lower carbon footprint. This makes them an environmentally friendly choice for conscientious consumers. Additionally, these models are designed with adjustable shelves, allowing users to customize the interior layout to maximize storage space for taller items or bulk groceries.

Both the ZETF 180 W and ZETF 180 SI feature an easy-to-use digital control panel, making temperature adjustments simple and straightforward. They also come with LED lighting that illuminates the interior, ensuring easy visibility while consuming less energy compared to traditional lighting options.

In terms of aesthetics, the Zanussi ZETF 180 W presents a classic white finish, which complements a wide range of kitchen designs, while the ZETF 180 SI showcases a sleek stainless steel appearance for a more modern look. This versatility in design makes both models suitable for various kitchen styles.

Storage solutions in these fridge-freezer combos include spacious door bins, a salad crisper drawer, and easy-access freezer compartments, which enhance organization and accessibility. With safety and convenience in mind, they also come equipped with features such as a door open alarm, ensuring that energy is not wasted by leaving the door ajar.

In conclusion, the Zanussi ZETF 180 W and ZETF 180 SI are exceptional options for individuals seeking a reliable, stylish, and efficient fridge-freezer combination. With their advanced technologies, ample storage capacity, and modern design, these models exemplify Zanussi's commitment to quality and innovation in kitchen appliances.