Location, Door reversibility | Zanussi ZRG717CW guide

Location

The appliance should be installed well away from sources of heat such as radiators, boilers, direct sunlight etc. En- sure that air can circulate freely around the back of the cabinet. To ensure best performance, if the appliance is positioned below an overhanging wall unit, the minimum distance between the top of the cabinet and the wall unit must be at least 100 mm . Ideally, however, the appliance should not be positioned below overhanging wall units. Accurate levelling is ensured by one or more adjustable feet at the base of the cabinet.

If the cabinet is placed in a corner and the side with the hinges facing the wall, the distance between the wall and the cabinet must be at least 10 mm to allow the door to open enough so that the shelves can be removed.

Warning!

It must be possible to dis- connect the appliance from the mains power supply; the plug must therefore be easi- ly accessible after installa- tion.

min.100 mm

15 mm

Door reversibility

Important! To carry out the following operations, we suggest that this be made with another person that will keep a firm hold on the doors of the appliance during the operations.

To change the opening direction of the door, do these steps:

1.Remove the plug from the power socket.

2.Tilt back the appliance carefully so that the com- pressor cannot touch the floor.

3.Unscrew both adjustable feet.

4.Unscrew the screws of the door bottom hinge.

1)If foreseen

5.Take off the appliance door by pulling it slightly downwards.

6.Unscrew the top door hinge pin of the appliance then screw it back on the other side.

7.Fit the appliance door on the upper door hinge pin.

8.Remove the lower hinge. Put over the pin in the di- rection of the arrow.

9.Unscrew and install the screw on the opposite side.

10.Install the lower hinge on the opposite side leav- ing the position of the door unchanged.

11.Screw in the one screw in the place set free on the other side as well as the ad- justable feet (2 pieces).

12.Remove and install the handle1) on the opposite side.

13.Reposition, level the appliance, wait for at least four hours and then con- nect it to the power socket.

Do a final check to make sure that:

•All screws are tightened.

•The door opens and closes correctly.

If the ambient temperature is cold (i.e. in Winter), the gasket may not fit perfectly to the cabinet. In that case, wait for the natural fitting of the gasket.

ZRG717CW specifications

The Zanussi ZRG717CW is a compact and efficient refrigerator ideal for those seeking reliable cooling performance in smaller spaces. With its sleek white design, this appliance seamlessly fits into various kitchen aesthetics while delivering outstanding functionality.

One of the standout features of the ZRG717CW is its impressive energy efficiency. Rated A+ on the energy efficiency scale, it ensures that your electricity bills remain low while minimizing environmental impact. The appliance operates quietly, making it perfect for open-plan living spaces or smaller homes where noise can be a concern.

The interior of the Zanussi ZRG717CW is thoughtfully designed to maximize storage space. The fridge boasts a net capacity of around 132 liters, providing ample room for fresh food, drinks, and condiments. Adjustable glass shelves offer flexibility, allowing users to customize the space according to their needs. Moreover, the shelves are designed to contain spills, preventing messes and making clean-up hassle-free.

A notable aspect of this refrigerator is its efficient cooling system, featuring Dynamic Air Technology. This technology ensures that cool air is evenly distributed throughout the fridge, maintaining a consistent temperature to keep food fresher for longer. Additionally, the refrigerator includes a separate salad crisper drawer that helps retain the freshness and texture of fruits and vegetables by controlling humidity levels.

The Zanussi ZRG717CW also incorporates user-friendly features. Its reversible door allows for flexible installation options, making it easy to adapt to your kitchen layout. Interior lighting ensures that you can easily locate items, even in low light conditions. The appliance is designed for practicality, with easy-to-clean surfaces and a simple manual control system that makes adjusting settings straightforward.

Furthermore, the refrigerator is built with durability in mind, employing high-quality materials that can withstand the demands of daily use. Its compact size makes it an excellent choice for apartments, offices, or as an additional fridge in larger homes.

In summary, the Zanussi ZRG717CW offers a blend of efficiency, practicality, and innovative technologies. Its energy-saving capabilities, dynamic cooling system, and thoughtful design elements make it a valuable addition to any home looking for a reliable refrigeration solution. Whether you have limited space or simply need a dependable second refrigerator, the ZRG717CW is an excellent choice that meets modern cooling demands with ease.