Instructions for totally built-in appliances
Recess dimensions
Height | 1225 mm |
Depth | 550 mm |
Width | 560 mm |
The applianceÕs door has been locked in position for transport by means of pins on both sides.
According to the door opening direction, remove relevant pins at the top and at the bottom.
To ensure adequate ventilation, allow the clearances shown in figure.
Furthermore, it is necessary that the cabinet has a ventilation recess with the following dimensions:
depth | 50 mm |
width | 540 mm |
Push appliance into housing until stop strip (A) touches the kitchen unit.
Open the door and push the appliance against the side of the kitchen unit opposite to that of appliance hinges.
Fasten the appliance with 4 screws provided in the kit included with the appliance.
Snap ventgrille (C) and hinge cover (D) into position
|
| 2 |
|
50 mm | min. | 200 cm |
|
|
| ||
|
|
| min. |
|
|
| cm2 200 |
D567 |
|
|
|
|
| 50 |
|
| 540 |
|
|
|
| B |
|
|
| T | H |
PR01 |
|
|
|
|
| A |
|
D022 |
D |
C |
D727 |
17