Zanussi ZO 29 N, ZO 29 Y, ZO 29 S manual Changing the opening direction of the door

Changing the opening direction of the door

Unplug the appliance before performing the following operations:

Remove the ventilation grille (D-Fig. 3).

Unscrew the bottom hinge (E-Fig. 3).

Remove the door from the upper pivot (A-Fig. 4).

Remove the pivot and the washer (A+B-Fig. 4) from the upper hinge (C), then mount these on the opposite side.

Re-assemble the door.

Screw down the bottom hinge (E-Fig. 3) on the opposite side, using the screws previously removed.

Detach the plug (F-Fig. 3) from the ventilation grille

(D). To do this, press it in the direction of the arrow.

Insert the plug, which is supplied with the appliance, into the hole left free on the opposite side.

Re-assemble the ventilation grille.

Reverse the direction of the handle (Fig. 5).

Warning

After having reversed the opening direction of the door, check that the door gasket is adherent to the cabinet.

If the ambient temperature is cold (i.e. in Winter), the gasket may not fit perfectly to the cabinet. In that case, wait for natural fitting of the gasket or accelerate this process by heating up the part involved with a normal hairdrier.

	Fig. 3
E	F
F
	F
D
F
D640

Fig. 4

C

B

A

D736

Fig. 5

D737

18