MAINTENANCE
Reservoir Rinsing
With use, the water reservoir will begin to fill with ground material from the objects being sharpened and wheel particles removed during the sharpening process. Keep the water reservoir clean and free of residue build up.
To rinse the water reservoir:
1.UNPLUG THE SHARPENER FROM THE POWER SOURCE.
2.Tilt the sharpener to drain any water in the reservoir through the drain trough on the back of the sharpener.
3.Move the tool rest away from the grinding wheel.
4.Fill the reservoir with fresh water and empty from the drain trough. Repeat until clean.
Reduce the risk of electrocution by keeping all connections dry and off the ground. DO NOT touch plugs with wet hands. Failure to follow these warning could result in seri- ous injury.
Model H6069 Wet Sharpener |