Grizzly H6248 instruction manual Installing Grinding Head Assembly, Attachments, Controls

Installing Grinding

Head Assembly

1.With the throat of the grinder head pointing up, insert the hex shaft into the grinder motor housing.

2.Tighten the locking knob to secure the grinding head.

3.Set the hopper onto the grinder head throat (refer to the Parts Breakdown on page 11 for more detail).

Attachments

1.To install a sausage stuffing cone, remove the lock ring, cutting die and cutting blade. Note–Attachments require the removal of the cutting plate and cutting blade to function properly.

2.Select a sausage stuffing cone and insert it through the back of the cone flange and lock ring (Figure 5).

Figure 5. Sausage stuffing cone installation

3.Tighten the lock ring clockwise onto the grinder head.

4.For the Kubbe attachment, follow steps 1-3.

Model H6248 Meat Grinder

Controls

ON/OFF and Circuit Breaker Buttons (Figure 6):

Figure 6. Button location

1.Press the ON button to turn the motor ON.

2.Press the OFF button to turn the motor OFF.

3.The OFF button doubles as the REVERSE button. WAIT UNTIL GRINDER HAS COME TO A COM- PLETE STOP BEFORE REVERSING. The motor will only turn in reverse as long as the REVERSE button is pressed.

4.The built in circuit breaker will trip if the grinder jams or is overloaded by forc- ing too much product through at one time. You will need to press the CIR- CUIT BREAKER to reset the motor after the jam is cleared.

-7-