Grizzly H8067 owner manual Parts Inventory, Supplies/Tools, Recommended Tools & Supplies

Page 6

SECTION 3: PARTS INVENTORY

Inventory

REF	PART #	DESCRIPTION	QTY
1	PH8067001	Mandolin Body	1
2	PH8067002	Neck	1
3	PH8067003	Fretboard	1
4	PH8067004	Bridge	1
5	PH8067005	Tuning Machines	2
6	PH8067006	Tailpiece	1
7	PH8067007	Nut	1
8	PH8067008	Endpin	1
9	PH8067009	Dowels	2
10	PH8067010	Strings	8
11	PH8067011	Bushings	8
12	PH8067012	#3 x 3/4" SS Screw	1
13	PH8067013	#1 x 3/8" SS Screws	14

9

11

10

1312

Figure 2. Additional components.

Supplies/Tools

The majority of the wood components in this kit come fully machined and ready for assembly. A small amount of sanding and finish work is need- ed to complete the mandolin.

Recommended Tools & Supplies:

1

2

3 5

4

8

7

6

• Wood Glue—Titebond Original Wood Glue
• #80 to #320 Sanding Paper
•	Flexible Sanding Block
• “000” Grade Steel Wool
• Clamps or Rubber Strips (made from cut up
	inner tubes)
•	Electric/Cordless Drill
•	Drill Bit (1/16")
•	Small Brad Nails
•	Wire Cutters
•	Razor Blades
•	Chisel
•	Phillips Screwdriver

Figure 1. Boxed components.

-4-

•	Masking Tape
•	Lightweight Hammer
• Rubber Dead Blow Hammer
•	Steel Straight Edge
•	Sharp Pencil
•	File Assortment
•	Finishing Materials
•	Electronic Tuner
•	Coat Hanger
•	NIOSH Approved Respirator
• ANSI-Approved Safety Glasses

H8067 Flat Iron Style Mandolin Kit

Image 6

Contents Model H8067 Flat Iron Style Mandolin KIT Page Table of Contents Safety Introduction ForewordContact Info Supplies/Tools Parts InventoryInventory Recommended Tools & SuppliesIdentification Fretboard SandingBodyNeck Repeat StepsNeck to the Body AssemblyTo install the neck Components and Hardware Needed QtyPage Page To attach the fretboard to the neck To clean up the binding and fret ends Shaping NeckShaping Fretboard Final Sanding To prepare the mandolin for finishingFinishing To finish the mandolinTo install the nut To install the tailpieceNutTailpiece Fitting Bridge Tuning MachinesTo install the tuning machines To fit the bridge to the soundboardPlacing Bridge To place the bridgeTo install the mandolin strings Winding Strings String HeightTo check the string height at the first fret Tuning Important issues to consider when tuning a mandolinTo check the string height at the 12th fret Accessories Reference InfoModel H5750-59 McFaddens Lacquers and Fillers G8979-6 Pc. Mini File SetWarranty and Returns H8067 Flat Iron Style Mandolin Kit Page Page