Specifications, Power Output Measurement

2.SPECIFICATIONS

Microwave output		1,800W to 180W
Frequency		2,450MHz
Power supply		208V, 60Hz
Rated current		13 Amp.
Safety Device
Thermal protector(Magnetron) 150°C(270°F)Open
(Thermostat)		80°C(144°F)Close
Thermistor (Magnetron)		200°C(360°F) Open
		108°C(194°F)Close
Thermistor(Duct)		120°C(216°F) Open
Fuse (Cartridge Type)		250V 10A
Micro switch, Relay
		Interlock Switch
		Interlock monitor Switch
		Door sensing Switch and
		Relay RL-3 and 4
Max. input time		Electronic Digital, up to
Manual		10min./Memory 30min.
Overall Dimensions	422(W)x540(D)x335(H) mm
Oven cavity size	330(W)x330(D)x230(H) mm
Effective Capacity of Oven Cavity			19.1liters
Net weight		32Kg

3. POWER OUTPUT MEASUREMENT

NOTE: The power output specification, 1800W on this model is measured with IEC measurement. The power output is measured with two(2) liters water is equiva- lent to 1800W in measurement with IEC, when mea- sured with the following power output.

(1)1. Fill two beakers, one liter of tap water respec- tively

2.Use an accurate thermometer and measure each water temperature respectively.

(2)Place beakers side by side in center of the ceramic tray.

(3)Close the door,set the “TIME” for two minutes. Touch the “START” key and heat the water for exactly two minutes.

(4)Take the beakers out, immediately stir the water and measure the water temperatures respectively.

(5)Calculate the temperature rise of water in each beaker. Then calculate the average value of the two temperature rises.( ƒ¢t)

(6)The teperature rise shall be in the following range; Average Temp. Rise

Minimum 23.1° C

Maximum 28.3° C

Power output is affected by the line voltage under load.

(7)For correct Power output measurement, the line voltage under load must be 208±2Volts.

4.PRECATIONS AND REPAIR SERVICE TIPS

PRELIMINARY

A. SINCE NEARLY 4,000 VOLTS EXISTS IN SOME CIRCUITS OF THIS MICROWAVE OVEN, RE- PAIRS SHOULD BE CARRIED OUT WITH GREAT CARE.

B. TO AVOID POSSIBLE EXPOSURE TO MICRO- WAVE ENERGY LEAKAGE, THE FOLLOWING PRECATIONS MUST BE TAKEN BEFORE SER- VICING.

(1)Before the power is applied.

(a)Open and close door several times to make sure the interlock switch, door sensing switch and interlock monitor switch operate properly. (Listen for the clicking sound from switches.) Make sure the interlock monitor switch is closed after the interlock switch and door sens- ing are open when the door is opened.

(See pages 1 and 6)

(b)Make sure the perforated screen and the choke dielectric of the door are correctly mounted.

(2)After the power is applied.

(a)Open and close the door to see if the interlock mechanism operates properly.

(b)Check microwave energy leakage with a leak- age detector and confirm the energy leakage is below 5mW/cm2

(3)Do not operate the unit until it is completely repaired of any of the following conditions.

(a)Door is not closed firmly against the cavity front.

(b)The hinge is broken.

(c)The choke dielectric or the door seal is dam- aged.

(d)The door is bent or warped, or there is any other visible damage to the oven that may cause microwave energy leakage.

Note: Always keep the seal clean.

(e)Make sure that there are no defective parts in the interlock mechanism.

(f)Make sure that there are no defective parts in the microwave generating and transmission assembly. (especially wave guide).

(4)The following items should be checked after the unit is repaired.

(a)The interlock monitor switch is connected cor- rectly and firmly.

(b)The magnetron gasket on the magnetron is properly positioned.

(c)Waveguide and oven cavity are intact. (No leakage of microwave energy).

(d)The door can be properly closed and the safety switches work properly.

(e)The oven must be stopped when the door is opened or the time is up.

The oven must not be operated with any of the above components removed or bypassed.

- 2 -

EM-C180 specifications

The Garland EM-C180 is a high-performance electric meat grinder designed for both commercial and home use. It stands out in the market due to its robust construction, advanced features, and exceptional efficiency. This versatile machine is perfect for processing various types of meat, including beef, pork, poultry, and fish, making it a favorite among chefs and home cooks alike.

One of the key features of the EM-C180 is its powerful motor. With a robust 1.5 HP motor, this grinder can handle large quantities of meat with ease, boasting an impressive grinding capacity of up to 800 pounds per hour. This efficient performance saves time and effort, making it ideal for busy kitchens that require consistent output. The motor is designed for durability and longevity, ensuring that the grinder remains reliable through frequent use.

The EM-C180 incorporates advanced blade technology, featuring stainless steel cutting blades and plates that ensure precision grinding. The blades are sharp and designed to create uniform meat textures, whether for sausages, burger patties, or ground meat. The machine comes with multiple grinding plates of various sizes, allowing users to customize the coarseness of the grind according to their preferences.

Another notable characteristic of the Garland EM-C180 is its user-friendly design. The machine features an easy-to-use control panel with straightforward settings, enabling operators to adjust the grinding speed and choose the appropriate plate with minimal hassle. Additionally, it includes a reverse function, which helps to easily clear any meat jams that may occur during the grinding process.

Safety is a primary concern for any kitchen equipment, and the EM-C180 addresses this with built-in safety features. The grinder is equipped with safety switches that prevent accidental operation, ensuring the safety of users in a fast-paced environment. The sturdy construction includes non-slip feet, providing stability during operation.

In summary, the Garland EM-C180 electric meat grinder is a powerful and efficient kitchen appliance that meets the needs of both professional and amateur cooks. With its durable motor, advanced cutting technology, user-friendly operation, and safety features, it is a reliable choice for those looking to enhance their meat preparation process. Whether used in a bustling restaurant or a home kitchen, the EM-C180 delivers high-quality results that impress.