Removing Ceramic Tray ASS’Y, Removing Door

HINT FOR LAMP-CHANGE

Before removing the bulb access panel, pull out the main-plug. Change the faulty bulb and secure the bulb access panel. Plug the cord back in and check operation.

F. CHANGING POWER SUPPLY CORD (See exploded view on page 15)

(1) Unfasten 1 screw for ground and pull out the

2 wires of the power cord from the terminal plate.

(2)Remove 1 screw for the bottom bracket of the cord bushing.

(3)Install the new power supply cord with the reverse procedure of above (1) to (2).

WARNING:

For changing the power supply cord, never use other than the following.

Key No. Order No.		Parts Name
5	617 140 1318	Power cord Ass’y
6	617 140 1332	Cord bush
7	617 140 1349	Bottom bracket

G. REMOVING CERAMIC TRAY ASS’Y

(See Fig.12 )

(1)Take off the cabinet.

(2)Put (insert) a screwdriver in the 9 mm diameter hole located at the lower hinge of left side of the oven cavity. Push the tray up with the screw- driver.

(3)Open the door and take out the tray very care- fully.

NOTES

-After replacing the door, be sure to check that the interlock switch, the door sensing switch

and the interlock monitor swich operate normally. (See pages 1 and 6)

-After replacing the door, check for microwave ene- rgy leakage with a leakage detector. Microwave energy leakage must be below the limit of 5mW/c ‡u.(For US)

-After instaling the door, check for microwave energy with a leakage detector and confirm that the leakage is the below the limit of 1 mW/cm2 (at 275cc waterload),5 mW/cm2 (at no load) and 5 mW/cm2 (at 275cc water load without cabinet) . (For CANADA)

I.HOW TO RESET THE MEMORY OF ACCUMU- LATIVE COOKING TIME

1. Push the keys step by step as follows,

“ CLEAR	“, “ TIME	“, “ 8 “, “ 8 “, “ 8 “, “ 1 “
“ START	“, “ START	“.

The display will show accumulative cooking time in display window.

2. Then push the keys as follows. “ 0 “, “ MEMORY “.

The Memory of Accumulative cooking time will be cleared.

J.RELEASING TYPE CONNECTOR

This oven is provided with locked type connectors. When you remove a connector, pull the connector while releasing the lock by pressing “A” point shown below. Do not pull the wire of the connector.

Connector:

S1, S2, S102, S104, S105 (Figure 13)

Hole

H.REMOVING DOOR

Door

Screw driver

Figure 12

A	A

Figure 13

Figure 14

Pull connector case (Never pull the wire)

Remove 2 hex nuts securing the upper hinge, remove 3 hex nuts securing the lower hinge and remove 1 special screw securing the door arm (located at the bottom of the door sash).

Figure 15

- 14 -

EM-C180 specifications

The Garland EM-C180 is a high-performance electric meat grinder designed for both commercial and home use. It stands out in the market due to its robust construction, advanced features, and exceptional efficiency. This versatile machine is perfect for processing various types of meat, including beef, pork, poultry, and fish, making it a favorite among chefs and home cooks alike.

One of the key features of the EM-C180 is its powerful motor. With a robust 1.5 HP motor, this grinder can handle large quantities of meat with ease, boasting an impressive grinding capacity of up to 800 pounds per hour. This efficient performance saves time and effort, making it ideal for busy kitchens that require consistent output. The motor is designed for durability and longevity, ensuring that the grinder remains reliable through frequent use.

The EM-C180 incorporates advanced blade technology, featuring stainless steel cutting blades and plates that ensure precision grinding. The blades are sharp and designed to create uniform meat textures, whether for sausages, burger patties, or ground meat. The machine comes with multiple grinding plates of various sizes, allowing users to customize the coarseness of the grind according to their preferences.

Another notable characteristic of the Garland EM-C180 is its user-friendly design. The machine features an easy-to-use control panel with straightforward settings, enabling operators to adjust the grinding speed and choose the appropriate plate with minimal hassle. Additionally, it includes a reverse function, which helps to easily clear any meat jams that may occur during the grinding process.

Safety is a primary concern for any kitchen equipment, and the EM-C180 addresses this with built-in safety features. The grinder is equipped with safety switches that prevent accidental operation, ensuring the safety of users in a fast-paced environment. The sturdy construction includes non-slip feet, providing stability during operation.

In summary, the Garland EM-C180 electric meat grinder is a powerful and efficient kitchen appliance that meets the needs of both professional and amateur cooks. With its durable motor, advanced cutting technology, user-friendly operation, and safety features, it is a reliable choice for those looking to enhance their meat preparation process. Whether used in a bustling restaurant or a home kitchen, the EM-C180 delivers high-quality results that impress.