Evaluation BOARD/KIT Important Notice

Texas Instruments (TI) provides the enclosed product(s) under the following conditions:

This evaluation board/kit is intended for use for ENGINEERING DEVELOPMENT, DEMONSTRATION, OR EVALUATION PURPOSES ONLY and is not considered by TI to be a finished end-product fit for general consumer use. Persons handling the product(s) must have electronics training and observe good engineering practice standards. As such, the goods being provided are not intended to be complete in terms of required design-,marketing-, and/or manufacturing-related protective considerations, including product safety and environmental measures typically found in end products that incorporate such semiconductor components or circuit boards. This evaluation board/kit does not fall within the scope of the European Union directives regarding electromagnetic compatibility, restricted substances (RoHS), recycling (WEEE), FCC, CE or UL, and therefore may not meet the technical requirements of these directives or other related directives.

Should this evaluation board/kit not meet the specifications indicated in the User’s Guide, the board/kit may be returned within 30 days from the date of delivery for a full refund. THE FOREGOING WARRANTY IS THE EXCLUSIVE WARRANTY MADE BY SELLER TO BUYER AND IS IN LIEU OF ALL OTHER WARRANTIES, EXPRESSED, IMPLIED, OR STATUTORY, INCLUDING ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR ANY PARTICULAR PURPOSE.

The user assumes all responsibility and liability for proper and safe handling of the goods. Further, the user indemnifies TI from all claims arising from the handling or use of the goods. Due to the open construction of the product, it is the user’s responsibility to take any and all appropriate precautions with regard to electrostatic discharge.

EXCEPT TO THE EXTENT OF THE INDEMNITY SET FORTH ABOVE, NEITHER PARTY SHALL BE LIABLE TO THE OTHER FOR ANY INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES.

TI currently deals with a variety of customers for products, and therefore our arrangement with the user is not exclusive.

TI assumes no liability for applications assistance, customer product design, software performance, or infringement of patents or services described herein.

Please read the User’s Guide and, specifically, the Warnings and Restrictions notice in the User’s Guide prior to handling the product. This notice contains important safety information about temperatures and voltages. For additional information on TI’s environmental and/or safety programs, please contact the TI application engineer or visit www.ti.com/esh.

No license is granted under any patent right or other intellectual property right of TI covering or relating to any machine, process, or combination in which such TI products or services might be or are used.

FCC Warning

This evaluation board/kit is intended for use for ENGINEERING DEVELOPMENT, DEMONSTRATION, OR EVALUATION PURPOSES ONLY and is not considered by TI to be a finished end-product fit for general consumer use. It generates, uses, and can radiate radio frequency energy and has not been tested for compliance with the limits of computing devices pursuant to part 15 of FCC rules, which are designed to provide reasonable protection against radio frequency interference. Operation of this equipment in other environments may cause interference with radio communications, in which case the user at his own expense will be required to take whatever measures may be required to correct this interference.

EVM WARNINGS AND RESTRICTIONS

It is important to operate this EVM within the input voltage range of -0.5 V to 4.1 V and the output voltage range of 1 Vrms.

Exceeding the specified input range may cause unexpected operation and/or irreversible damage to the EVM. If there are questions concerning the input range, please contact a TI field representative prior to connecting the input power.

Applying loads outside of the specified output range may result in unintended operation and/or possible permanent damage to the EVM. Please consult the EVM User's Guide prior to connecting any load to the EVM output. If there is uncertainty as to the load specification, please contact a TI field representative.

During normal operation, some circuit components may have case temperatures greater than 85°C. The EVM is designed to operate properly with certain components above 85°C as long as the input and output ranges are maintained. These components include but are not limited to linear regulators, switching transistors, pass transistors, and current sense resistors. These types of devices can be identified using the EVM schematic located in the EVM User's Guide. When placing measurement probes near these devices during operation, please be aware that these devices may be very warm to the touch.

Mailing Address: Texas Instruments, Post Office Box 655303, Dallas, Texas 75265

TAS5601 specifications

The Texas Instruments TAS5601 is a high-performance class D audio amplifier designed for various audio applications, ranging from home audio systems to professional audio equipment. This device is particularly renowned for its efficiency, sound quality, and compact design. The TAS5601 is specifically engineered to drive passive and active speakers, allowing users to achieve high power output and excellent sound fidelity.

One of the key features of the TAS5601 is its ability to deliver up to 50 watts of output power per channel, making it suitable for driving demanding loads. It operates within a supply voltage range of 15V to 30V, allowing for flexibility in various application environments. The amplifier’s efficiency is a significant advantage as it minimizes heat generation, enabling cooler operation and reducing the need for extensive thermal management solutions.

Technology-wise, the TAS5601 employs a proprietary, high-resolution pulse-width modulation (PWM) technique. This methodology ensures excellent linearity and low total harmonic distortion, translating into crystal-clear audio reproduction. The device also utilizes a robust feedback mechanism that adjusts the output in real time, further improving sound quality under varying load conditions.

The TAS5601 features integrated protections for over-current, over-temperature, and short-circuit scenarios, ensuring reliable performance and longevity. This makes it an excellent choice for both commercial and consumer audio products.

Another notable characteristic is the inclusion of an I2C interface, which offers enhanced programmability and flexibility. With this feature, designers can configure settings such as gain controls and filters, thus optimizing the amplifier for specific applications and listener preferences.

The TAS5601 supports multiple speaker configurations, including a dual-channel operation in a stereo setup or bridging mode for higher output in mono applications. It is designed to work seamlessly with various digital audio sources, allowing for versatility in integration with modern audio systems.

With its advanced features, state-of-the-art technologies, and robust performance, the Texas Instruments TAS5601 is a leading choice for audio amplification. Whether for home theater systems, portable speakers, or professional audio installations, the TAS5601 delivers exceptional sound quality while being energy efficient and adaptable to a wide range of needs.