Texas Instruments TAS5601 manual 3 EQC/DRC Demo, EQ/DRC Demo Tab 4 I 2C Tab

Page 10

www.ti.com

Using the EVM Software

4.2.3EQC/DRC Demo

This tab is used to compare different settings. Multiple EQ files can be loaded and switched back and forth for listening purposes to select the golden filters.

Figure 8. EQ/DRC Demo Tab

4.2.4I 2C Tab

Clicking on the I2C Interface tab displays the window shown in Figure 9. This window can be used to perform single or multiple-byte I2C accesses.

To INITIALIZE, use File -> Load Script and select the init file (see the attached

TAS5601_ADmode_Initialize.ini; also attached is the BDMode initialize file).

Also, by writing the device address and selecting NumBytes and also selecting Single Byte/Multiple Byte, data can be written or read from the device.

10

TAS5601 Digital Power Amplifier With MC5601 Modulator Kit

SLOU219–February 2008

Submit Documentation Feedback

Image 10

Contents TAS5601 Digital Power Amplifier With MC5601 Modulator Kit Related Documentation from Texas Instruments Purpose of This Document TAS5601EVM and MC5601 Features EVM Controller Board MC5601Recommended Power Supplies Software InstallationEVM Installation Loudspeaker ConnectorsDigital Audio Interface Spdif J1/OPTO Board Power-Up General GuidelinesUSB Interface ADC Interface Select 2-Channel BTL BD mode Setup Tab Getting Started Volume Tab All Channel Shutdown Advanced Features EQ and DRCEQ Viewer Tab 3 EQC/DRC Demo EQ/DRC Demo Tab 4 I 2C Tab4.1 I 2C Writes and Reads Volume Tab Volume Control TabOverview TI ALE Guide for TAS570xSelect Device Edit EQ Filter Display the Graph Generate EQ Filter Data Edit and Generate DRC Data Save EQ Data to FileEdit and Generate Alpha Filter Data Save EQ/DRC/Alpha Data to File Save DRC Data to FileSwitches TAS5601EVM Board Layouts Top Silk Screen ViewBill of Materials SchematicsBill of Materials for TAS5601EVM BTL/SE Amplifier PA1USB Reset USB InterfaceSpdif Receiver Jumper NotesAnalog to Digital Converter Project TAS5601EVM4 Controller BoardTAS5702 I/O Power Supplies LOW Voltage Power InputsRelated Documentation From Texas Instruments Related Documentation from Texas InstrumentsEvaluation BOARD/KIT Important Notice FCC WarningImportant Notice