Evolution of Venting | Field Controls Oil Venting Systems specs

The Evolution of Venting

As long as people have used fire to heat, it has been necessary to vent the smoke and combustion gases from the dwelling. Since heat rises, the natural solution was to allow the gases to vent through the roof via a hole or chimney. For centuries, this "natural draft" style of venting has been the accepted standard for venting stoves, furnaces and boilers. Whether fired by wood, coal, oil or gas, this system worked well and, when possible, is still used today.

Energy Efficiency and Tighter Homes

In the late 1970's and early 80's, energy efficiency became a top priority in America resulting in tighter homes and more efficient heating equipment. Tight

Conventional

Venting

homes restrict the infiltration of outside air which also restricts natural draft. Higher efficiency furnaces generate "cooler" exhaust gases which are more difficult to exhaust naturally as well. These factors led to the development of a mechanical method of venting to properly remove combustion gases from the dwelling.

Homes without Chimneys

Electric heat grew in popularity through the 1960's and 70's, resulting in the construction of homes without chimneys. Today, many homeowners are converting their heat from electric to gas or oil. In these cases, the contractor is faced with a challenge of venting the equipment. Choices include constructing a chimney or mechanically venting through the sidewall. Sidewall venting is much less expensive, easier and faster.

Power

Venting

Vent

Gases Out

Oil Burner

Hot air rises. As long as a chimney exists, it is in good condition and the combustion gases are warm enough to rise naturally, this method can be effective and safe.

Mechanically pulls gases through the sidewall, saving the cost and space required for a chimney.

Deteriorating Chimneys

Another factor contributing to the use and growth of power venting has been the deteriorating chimney.

Oil and gas combustion generate acid rich gas that can eventually destroy a clay or masonry chimney. A deteriorating chimney can be relined with metal duct, but even metal duct is subject to rust and corrosion due to the destructive nature of the acid and condensation. Sidewall venting is safer and less expensive than relining a chimney.

Oil Venting Systems specifications

Field Controls Oil Venting Systems are engineered to enhance the efficiency and safety of oil heating applications while ensuring environmental compliance. These systems are designed to facilitate the venting of combustion gases, preventing the buildup of harmful substances and maintaining optimal performance of oil-fueled heating appliances.

A standout feature of Field Controls Oil Venting Systems is their adaptability. They can be seamlessly integrated with a variety of oil-fired heating units, including furnaces and boilers. This versatility allows homeowners and businesses to upgrade or replace their existing venting systems with minimal hassle, leading to improved energy efficiency and reduced operational costs.

The technology that underpins these venting systems is designed to optimize airflow and minimize pressure drop, allowing for efficient exhaust of combustion gases. Field Controls employs advanced materials that are resistant to corrosive gases, ensuring a longer lifespan and reduced maintenance requirements. Additionally, their systems utilize a unique multi-hinge design, which enhances flexibility during installation, ensuring a perfect fit in a diverse range of configurations.

Field Controls also focuses on safety with features such as backdraft dampers and safety switches. These elements prevent backflow of exhaust gases into the living space, providing peace of mind for users. The systems are rigorously tested to comply with national safety standards, ensuring a reliable and secure installation for residential and commercial applications alike.

Moreover, Field Controls Oil Venting Systems prioritize efficiency by optimizing the venting process. This results in reduced energy consumption and lower emissions, aligning with modern environmental standards and helping users transition to more sustainable heating options.

In summary, Field Controls Oil Venting Systems represent a robust solution for oil heating applications, combining safety, efficiency, and adaptability. With their innovative design and commitment to quality, they provide users with a reliable means to manage oil venting, ensuring both comfort and compliance with environmental regulations. By investing in a Field Controls system, customers can enhance their heating systems while contributing to a cleaner and more efficient future.