Line 6 GearBox 3.7 – GearBox How To....
All the effects have basic sounds programmed so they’re ready to go if you turn them on. This Tone can be, of course, completely customized by you, so you can turn it into whatever you want.
Saving the Basic Tone - Once you’ve made alterations to this basic Tone, you can then choose Save
Tone from GearBox’s File menu if you’d like to have your changes replace the Basic Tone. Or...
Save As - Choose Save Tone As from GearBox’s File menu if you’d like to leave the Basic Tone as it was, and save the new setting you’ve created as a new Tone. You’ll then be given a dialog to name the Tone, and provide additional information to categorize the Tone if you like.
pReturn to How To Topics
How to Save a Dual Tone (POD X3)
When GearBox is configured for POD X3/X3 Live/X3 Pro, you’ll have a specific set of “Dual Tone” commands in the GearBox File menu. Use the Save As command here to save the complete current Channel settings as a Dual Tone preset file onto your computer.
Note – Note that these Dual Tone type files are only able to be opened in GearBox when set for a POD X3 family device. If you want to be able to open a Tone with another Line 6 device, use the Tone 1 or Tone 2 Save As command to save either of these Tones’ settings as a “Single Tone” preset file. Check out the full info about saving POD X3 Tones in the GearBox with POD X3 chapter here
pReturn to How To Topics
How to Save a Tone
Note – If you are using GearBox with POD X3/X3 Live/X3 Pro, then you have more options for saving Tones! Please see the previous How To topic, and check out the full info in the GearBox with POD X3 chapter here.
6•8
