
Line 6 GearBox 3.7 – GearBox with POD X3
File > Tone 2
Open... - Launches the File > Open dialog allowing you to select any GearBox Dual Tone or Single Tone preset file from your computer’s hard disk.
•Choosing a Single Tone file loads the data from the preset, fully replacing the data previously in the edit buffer, putting the data into only Tone 2, and Tone 1 is left as is.
•Choosing a Dual Tone file loads only the Tone 1 data from the preset, fully replacing only the data previously in the Tone 2 edit buffer, and Tone 1 is left as is.
Save As... - Launches the Save As dialog where you can name and then choose where to save the current Tone 2 edit buffer settings as a Single Tone preset anywhere on your computer’s hard disk. Note that a Single Tone preset can be opened by GearBox with any Line 6 USB hardware (unlike Dual Tone presets which can only be opened with GearBox with POD X3).
Opening Tones from the Online Tone Library
A world of
The Online Tone Library
Note that the Tone presets in the Library are Single Tone preset types, therefore a Tone Library Tone will always load into Tone 1 in GearBox, and leave any settings in Tone 2 undisturbed. You can tweak the Tone just like any other once it is loaded, and save it to your computer using the File menu options (see the previous section). A Tone loaded from the Tone Library is actually only loaded into the edit
5•12