
Line 6 GearBox 3.7 – GearBox with POD X3
buffer and not immediately written to the
Tone Translations - Opening Tones Created with
You are certainly not limited to opening only Tone preset files that were created by others using different Line 6 hardware such as from the Online Tone Library as described above, GuitarPort Online or the Line 6 Custom Tone site. Since there are some fundamental differences between Line 6 hardware, some Tone elements may be slightly different or “translated” to work on your X3 device. A few guidelines are as follows:
•POD X3 supports opening Tone presets files created with...
•Any
•Any POD 2.0 device. Some models may be translated upon loading these Tone presets into your POD X3.
•When loading into POD X3 a Tone preset created with PODxt that includes a Bass Amp model, the Bass Amp D.I. and Blend parameters will be removed. When a Tone preset that includes a Bass Amp model is loaded on PODxt, these parameters will be set to default values (Blend Volume and Delay set to Off/Minimum).
•Dual Tone preset files created with POD X3 can only be opened by POD X3 family devices. POD
•All Tone preset files created with
•POD X3 does not support loading Tone preset files that were created with any Bass PODxt device, Vetta or Flextone amplifier. Likewise, these products do not support loading Tones created by POD X3.
The POD X3 Hardware Memory Window
GearBox also offers a new Hardware Memory window specifically for POD X3 family devices which displays a local,
Upon launch of the GearBox application, the Hardware Memory is opened and its “Get All” function is automatically performed. This loads all the data from your POD X3 User Folder into the respective Banks and Channels into your computer’s local memory, displaying them in the window. From this point when working with the Hardware Memory window, the data you see listed in each Bank in the window are what you are actually working with in your computer’s local memory (or in the “edit
5•13