Line 6 3.7 manual Stereo Paired Inputs

Line 6 GearBox 3.7 – Driver Panel & Recording

the instantaneous feel necessary for competent performance while tracking.

When GearBox is not in use, the Input 1 & input

2 selectors are available. As shown here, TonePort

UX8 offers several input Sources to choose from.

The selected Source is what gets routed to the

Device Send.

Stereo Paired Inputs

You can also link inputs into stereo pairs. This affects hardware monitoring controls in the Outputs & Monitoring tab (see below).

2 – Device Sends info box: One line for each GearBox Record Send appears here along with a general description for each Send.

On UX8, Send 9-10 carries the GearBox - processed signal, so you can select this Send as the track input in your audio software to record the full GearBox Tone. Send 11-12 carries the “semi- processed” Tone, which can vary depending on what GearBox effects you select as either “Pre” or “Post” the Send 11-12. All other Sends carry an unprocessed signal of whatever is plugged into the respective Input jack on the UX8 hardware.

3 - Restore Defaults - click this button to restore all this tabs settings to their original default values.

4 - Clock Source - Set your preferred TonePort UX8 clock source with this menu. Select S/PDIF to sync the UX8 to an external S/PDIF clock source from another device’s digital output. If you are not connecting anything into UX8’s digital S/PDIF input, then keep this set to Internal to use the UX8’s own clock.

5 - Hardware Meters Show - This selector allows you to choose what the VU meters on the front of the UX8 are measuring. Note that these hardware meters function even if the GearBox software is not currently running.

3•22