Line 6 3.7 manual AES/EBU In & Out Connect Pdif In & Out Connect

Line 6 GearBox 3.7 – UsingYour Line 6 Hardware

AES/EBU In & Out - Connect	S/PDIF In & Out - Connect
digitally to other AES/EBU devices	digitally to other S/PDIF devices

FBV Pedal In - Connect a Line 6 FBV controller

MIDI In & Out/Thru -	Variax In - Connect	USB 2.0 - Connect
Connect to external MIDI	your Variax Guitar	to your computer*
hardware

AES/EBU Digital Input & Output - To record digitally from another digital device, connect it’s AES/EBU output to this Input. The AES/EBU In always receives 24-bit audio. To send output from POD X3 to another device digitally, connect from this AES/EBU Output to the AES/EBU In on your other device. Connecting digitally is the best choice for routing to external digital recording devices, such as a DAT recorder, digital video player, digital mixing board, etc. The AES/EBU output sends out the Tone(s) according to your device settings - these options are found on the POD X3 device itself by pressing the “Outputs” button (these digital I/O options are not accessible in GearBox). The digital signal is always sent at 24-bit resolution. For more information on using these digital connections, please see your POD X3 Pilot’s Handbook, or check out the GearBox Recording Setup Guide available for download on the GearBox - User Manuals page of the Line 6 web site.

S/PDIF Digital Input & Output - To record digitally from another digital device, connect it’s S/PDIF output to this S/PDIF Input. The S/PDIF In always receives 24-bit audio. To send output from POD X3 to another device digitally, connect from this S/PDIF Output to the S/PDIF in on your other device. the S/PDIF Out jack sends out 24-bit digital versions of the Direct Out signals. The System setup screen lets you choose the sample rate and adjust the level. Connecting digitally is the best choice for routing to and from external digital recording devices, such as a DAT recorder, digital video player, digital mixing board, etc. For more information on using these digital connections, please see your POD X3 Pilot’s Handbook, or check out the GearBox Recording Setup Guide available for download on the GearBox - User Manuals page of the Line 6 web site.

*Note that when using POD X3 Pro with GearBox, the GuitarPort Online playback audio is never routed to the AES/EBU or S/PDIF outputs. This is necessary to comply with artist copyright requirements that Line 6 follows for the GuitarPort Online Tracks and artist content.

FBV Pedal Input – Connect an optional Line 6 FBV Series foot controller here, including the FBV, FBV Shortboard, and FBV Express. The System page lets you set it all up. Note that POD X3 Pro doesn’t support the older Line 6 Floor Board or FBV2.

MIDI In & Out/Thru - Connect your POD X3 Pro to your MIDI equipment to send and receive Program Change Messages for selecting Presets or for communicating with other MIDI hardware & software. POD X3 Pro’s MIDI Out connects to another device’s MIDI In; the X3’s MIDI In goes

2•23