Line 6 3.7 manual TonePort UX2/UX8/KB37 Controllers

Line 6 GearBox 3.7 – GearBox Stand-Alone Application

To send out MIDI CC data from the adjustment of GearBox onscreen knobs & switches, check this box.

To control GearBox features (such as Wah or Volume) from a 3rd party hardware MIDI controller device or software, choose the MIDI Port that your controller unit is connected to. GearBox will then receive MIDI CC data on MIDI Channel 1.

TonePort UX2/UX8/KB37 Controllers

TonePort UX2, UX8 and KB37 include footswitch jacks on the hardware to provide remote control of GearBox parameters, such as Wah and Stomp On/Off. You can assign these controls to any available GearBox parameter or MIDI function from the MIDI tab of the Line 6 Audio-MIDI Devices application.

TonePort devices have the following jacks:

UX2	2 footswitch jacks
UX8	2 footswitch jacks
	1 Expression pedal jack
KB37	2 footswitch jacks
	1 Expression pedal jack

KB37 Controllers

Additionally, the TonePort KB37 features a number of knobs, wheels and buttons which can be configured to control more GearBox and 3rd-party application functions. KB37 ships with a default set of functions assigned to its controllers, which you can re-configure in the Line 6 Audio-MIDI Devices control panel.

4•10