Line 6 3.7 manual Using Inputs 1 & 2 with the GearBox standalone application, Asio Record Sends

Line 6 GearBox 3.7 – Driver Panel & Recording

The Inputs & Recording tab lets you select specific inputs for recording. Input source options are as follows:

Input 1: Instrument 1 or XLR 1 or Line 1 or S/PDIF (L)

Input 2: Instrument 2 or XLR 2 or Line 2 or S/PDIF (R)

Input 3: XLR 3 or Line 3

Input 4: XLR 4 or Line 4

Input 5: XLR 5 or Line 5

Input 6: XLR 6 or Line 6

Input 7: XLR 7 or Line 7

Input 8: XLR 8 or Line 8

You can also link inputs into stereo pairs. This affects hardware monitoring controls in the Outputs & Monitoring tab (see below).

Using Inputs 1 & 2 with the GearBox standalone application

The GearBox standalone application works with the TonePort UX8 driver to provide ultra-low latency via ToneDirect™ monitoring for Inputs 1 & 2 of the UX8, which includes two high-Z Instrument inputs, two XLR inputs, two Line level inputs and stereo S/PDIF input. GearBox’s ToneDirect™ Monitoring is ideally suited for recording guitar and bass with amp and effects processing, providing

the instantaneous feel necessary for competent performance while tracking.

ASIO Record Sends

This box displays the ASIO names of the UX8’s input sources as they appear in recording applications utilizing the UX8’s ASIO driver.

Sends 9-10 and 11-12 represent processed and semi- processed signals respectively, from the GearBox standalone application. If GearBox is not running, Sends 9-10 and 11-12 carry the signal from Input 1.

See the GearBox Standalone Application chapter for details on using the GearBox sends with the TonePort UX8.

3•9