Line 6 3.7 manual Mac Line 6 Audio-MIDI Devices Dialog, Line 6 Audio-MIDI Settings Driver Tab

Line 6 GearBox 3.7 – Driver Panel & Recording

Mac® - Line 6 Audio-MIDI Devices Dialog

You can launch the Line 6 Audio-MIDI Devices dialog from within the Mac® System Preferences, or from the GearBox Preferences > Hardware tab. On Mac® systems, all Line 6 hardware utilizes the Mac® OS X® Core Audio driver format, which means that some of your Line 6 device settings will be in the OS X Audio-MIDI Setup dialog. You can get to this dialog from within the Line 6 Audio-MIDI Devices dialog (or, from the Finder by going to Applications > Utilities > Audio-MIDI Setup).

Line 6 Audio-MIDI Settings - Driver Tab

TonePort & GuitarPort devices – The following example shows TonePort UX2 as the selected device, with the GearBox software running. If you have the TonePort UX8, you’ll have even more options, so be sure to also read up on the UX8 specific sections...

POD X3 & PODxt devices - You’ll see some differences with a POD device selected – as noted in the following descriptions…

1 2 3 4

5

6

1 – Line 6 Device selector: Allows selection of any supported Line 6 USB audio device that is connected. Note that if you have more than one supported device connected, each will be selectable in this list, regardless if it is in use by the GearBox application or not. If your device is not connected and powered on, it will not appear in this list.

2 – Selected Device Icon: An icon for the selected Line 6 Device appears here.

3 – Driver version: Displays the current device’s installed driver version number.

3•13