Faber Matrix Prepare the Wall, Install the Rangehood, For ALL Installations

Page 6

PREPARE THE WALL

1.Disconnect and move freestanding range from cabinet open- ing to provide easier access to rear wall. Put a thick, protective covering over cooktop, set-in range or countertop to protect from damage or dirt.

2.Determine and clearly mark with a pencil the center line on the wall where the rangehood will be installed.

3.Draw a horizontal line at 43" above the cooktop (as indicated in FIGURE 4). Mark two points (1) (in FIGURE 4) on the horizontal line, 7 7/8" away from the center line on each side. Make sure both marks are level.

4.Mark two points (2) (in FIGURE 4) which are 19 7/16" above the cooktop, and are 7 1/16" on either side of the center line. Make sure both marks are level.

WARNING: THE SCREWS PROVIDED FOR MOUNTING THIS RANGEHOODMUSTBEINSERTEDINTOSOLIDWOOD. THESE MUST NOT BE INSERTED INTO SHEET ROCK.

B

F

 

G

43"

 

19 7/16"

15"

FIGURE 4

5.In holes (1) (in FIGURE 4) attach the two mounting brackets

(B) to the wall with 2 mounting screws.

6.In holes (2) (in FIGURE 4) put one safety screw (G) in each

hole, do not tighten the screws all the way.

4.Hang the rangehood on the two mounting screws and from the inside of the hood, adjust the mounting screws to make the hood level (B in FIGURE 5).

5.Tighten the safety screws (Hole 2, in FIGURE 4)

6.For ducted installations, the DAMPER (J in FIGURE 1) must be attached to the exhaust opening at the top of the CANOPY SECTION. Connect the ductwork and seal all connections with duct tape.

FIGURE 5

FIGURE 6

INSTALL THE RANGEHOOD

1.Open the ducting panels on the rangehood. Disconnect the 4 panels from the hood by sliding the fixing pin lever (as indicated in (A) FIGURE 5).

2.Using two hands, remove the grease filters one at a time by pushing the filter forward and and pulling the handle down. (FIGURE 6)

3.Adjust the two adjusting screws on the mounting hardware (B in FIGURE 5) to the lowest point

FOR ALL INSTALLATIONS

1.Remove the cover from the Field Wiring Compartment with a phillips screwdriver. Feed the Power Supply Cable through the electrical knockout. Connect the Power Supply Cable to the rangehood cable. Attach the Power Supply Cable grounding lead to the green screw provided. Attach the White lead of the power supply to the White lead of the rangehood with a twist-on type wire connector. Attach the Black lead of the power supply to the Black lead of the rangehood with a twist-on type wire connector. Using the 4 holes provided screw the Field Wiring Compartment to the wall as dictated by your Power Supply Cable location (screws not provided). Replace the cover.

Version 09/05 - Page 6

Page 5 Page 7
Image 6
Page 5 Page 7
Contents Lisez Bien Cette Fiche Avant Dinstaller LA Hotte MatrixElectrical Requirements Venting RequirementsFor More Specific Ductwork INFORMATION, GO For residential use onlyAvertissement Pour Minimiser LES Risques Règlements DévacuationFiche Technique Électrique CORPORELS, Observer LES PrescriptionsPlan the Installation Rangehood ComponentsPersonal Injury Hazard Vented to the outside Not vented to the outsideInstall the Rangehood For ALL InstallationsPrepare the Wall Warranty & Service Ducted InstallationsDuctless Installations USE and Care InformationUSE and Care Control Panel KEY Green LED FunctionsUSE and Care Maintenance Fuse Replacement if Needed Fuse Model 5 X 20 5A time delayPlan DE LʼINSTALLATION Risque DE BlessureCalcul DE Longueur DU Conduit Version 09/05 Installation DE LA Hotte Pour Tout LES InstallationsPréparation DU MUR Pour Toutes LES Installations Installations Avec ConduitInstallation Sans Conduit Garantie ET ServicePanneau DE Contrôle Utilisation ET Entretien Suite Clef LED Vert FonctionsEntretien Utilisation ET Entretien Suite Changement DES Fusibles

Matrix specifications

Faber Matrix is a leading solution in the world of digital asset management and project collaboration, designed specifically to streamline workflows and enhance productivity for teams across various industries. This platform emphasizes user experience, integrating powerful features that cater to the unique needs of modern businesses.

One of the standout features of Faber Matrix is its intuitive interface, allowing users to easily navigate the platform. The dashboard presents a clear overview of tasks, project statuses, and team collaboration opportunities, making it simple for teams to stay aligned and focused. The drag-and-drop functionality facilitates easy organization of digital assets, significantly reducing the time spent on project management.

Collaboration is at the heart of Faber Matrix, with real-time editing capabilities that enable multiple users to work on documents simultaneously. This feature ensures that team members can communicate effectively and make adjustments on the fly, which is essential in fast-paced environments. Additionally, built-in commenting and annotation tools allow for seamless feedback and discussions, further enhancing team dynamics.

Faber Matrix leverages advanced cloud technologies, providing users with secure access to their files from anywhere, at any time. The platform's scalability means that it can grow alongside businesses, readily accommodating an increasing amount of data and user activity without compromising performance.

Integrating artificial intelligence, Faber Matrix offers smart tagging and categorization features. This technology automatically organizes digital assets based on their content, making it easier for users to find what they need quickly. Furthermore, analytics tools provide insights into asset usage and team performance, enabling managers to make data-driven decisions.

Security is a paramount concern for any digital platform, and Faber Matrix addresses this with robust data encryption methods and user access controls. This ensures that sensitive information remains protected while enabling teams to collaborate freely.

In summary, Faber Matrix stands out for its user-friendly interface, real-time collaboration features, cloud-based architecture, and integration of AI technologies. These characteristics work together to create an efficient workflow solution that caters to the needs of businesses seeking to enhance their productivity and collaboration capabilities. As organizations continue to navigate the complexities of digital transformation, Faber Matrix remains a reliable partner in fostering innovation and efficiency.
Top Page Image Contents