Faber Matrix installation instructions USE and Care Maintenance

Page 9

USE AND CARE CONTINUED - MAINTENANCE

Cleaning

Thestainlesssteelgreasefiltersshouldbecleanedfrequentlyin hot detergent solution or washed in the dishwasher. Stainless steel cleaner should be used on stainless rangehoods. Abrasives and scouring agents can scratch stainless steel finishes and should not be used to clean finished surfaces. The inside of the ducting panels (FIGURE 12) should be cleaned with a damp cloth and a neutral dish detergent. Do not use wet sponges or cloths or jets of water; do not use abrasive substances.

Grease Filter and Charcoal Filter Alarm Reset

To reset the metal grease filter alarm and the charcoal filter saturation alarm, turn off the motor and lights. Press and hold the speed 3 button for a minimum of 3 seconds until the LED's start to flash.

FIGURE 12

Charcoal Filter Information

The charcoal filters should be replaced (as indicated in FIGURE

9)when the S1 LED light flashes or at least every 4 - 6 months depending on heavy usage. The alarm only comes on when the motor is turned on.

To replace the charcoal filter, open the ducting panels, remove the metal grease filters and remove the old charcoal filters and replace with the new ones. Then replace the metal grease filters and close the ducting panels.

Charcoal Filter Alarm Activation

The filter alarm has to be activated in order to use with ductless installations which use the charcoal filters. The alarm can be activated upon installation or at a later time. To activate or de- activate the alarm turn off the motor and lights, and disconnect the hood from the power source by disconnecting the main switch located on the left side of the motor housing. Press and hold the T1 (speed 1) button and while holding down the T1 button, reconnect the power source. All 5 LED lights will then turn on and within 3 seconds press and hold the T1 button (speed 1) until the LED's on T1 (speed 1) and T4 (speed 4) flash to confirm the chosen setting:

LED flashes twice - Charcoal filter saturation alarm ENABLED LED flashes once - Charcoal filter saturation alarm DISABLED

Repeat the process if you want to change the chosen setting, ie if the filter alarm is disabled, repeat the above paragraph to enable. Once finished with the activation / de-activation, unplug and plug in again the power source to return to normal hood function.

Replacing the Lamps

Remove the light cover (as indicated in FIGURE 13) by removing the screws on the light bar. Remove the lights from the housing and replace the lamp with a 20 W MR-11 halogen lamp. Make sure that the two pins are properly inserted into the lamp holder socket. Replace the light cover.

FIGURE 13

WIRING DIAGRAM

• This rangehood uses 20 watt halogen lamps.

Version 09/05 - Page 9

Page 8 Page 10
Image 9
Page 8 Page 10
Contents Matrix Lisez Bien Cette Fiche Avant Dinstaller LA HotteFor More Specific Ductwork INFORMATION, GO Venting RequirementsElectrical Requirements For residential use onlyFiche Technique Électrique Règlements DévacuationAvertissement Pour Minimiser LES Risques CORPORELS, Observer LES PrescriptionsPlan the Installation Rangehood ComponentsPersonal Injury Hazard Not vented to the outside Vented to the outsideInstall the Rangehood For ALL InstallationsPrepare the Wall Ductless Installations Ducted InstallationsWarranty & Service USE and Care InformationKEY Green LED Functions USE and Care Control PanelUSE and Care Maintenance Fuse Model 5 X 20 5A time delay Fuse Replacement if NeededPlan DE LʼINSTALLATION Risque DE BlessureCalcul DE Longueur DU Conduit Version 09/05 Installation DE LA Hotte Pour Tout LES InstallationsPréparation DU MUR Installation Sans Conduit Installations Avec ConduitPour Toutes LES Installations Garantie ET ServiceClef LED Vert Fonctions Panneau DE Contrôle Utilisation ET Entretien SuiteEntretien Utilisation ET Entretien Suite Changement DES Fusibles

Matrix specifications

Faber Matrix is a leading solution in the world of digital asset management and project collaboration, designed specifically to streamline workflows and enhance productivity for teams across various industries. This platform emphasizes user experience, integrating powerful features that cater to the unique needs of modern businesses.

One of the standout features of Faber Matrix is its intuitive interface, allowing users to easily navigate the platform. The dashboard presents a clear overview of tasks, project statuses, and team collaboration opportunities, making it simple for teams to stay aligned and focused. The drag-and-drop functionality facilitates easy organization of digital assets, significantly reducing the time spent on project management.

Collaboration is at the heart of Faber Matrix, with real-time editing capabilities that enable multiple users to work on documents simultaneously. This feature ensures that team members can communicate effectively and make adjustments on the fly, which is essential in fast-paced environments. Additionally, built-in commenting and annotation tools allow for seamless feedback and discussions, further enhancing team dynamics.

Faber Matrix leverages advanced cloud technologies, providing users with secure access to their files from anywhere, at any time. The platform's scalability means that it can grow alongside businesses, readily accommodating an increasing amount of data and user activity without compromising performance.

Integrating artificial intelligence, Faber Matrix offers smart tagging and categorization features. This technology automatically organizes digital assets based on their content, making it easier for users to find what they need quickly. Furthermore, analytics tools provide insights into asset usage and team performance, enabling managers to make data-driven decisions.

Security is a paramount concern for any digital platform, and Faber Matrix addresses this with robust data encryption methods and user access controls. This ensures that sensitive information remains protected while enabling teams to collaborate freely.

In summary, Faber Matrix stands out for its user-friendly interface, real-time collaboration features, cloud-based architecture, and integration of AI technologies. These characteristics work together to create an efficient workflow solution that caters to the needs of businesses seeking to enhance their productivity and collaboration capabilities. As organizations continue to navigate the complexities of digital transformation, Faber Matrix remains a reliable partner in fostering innovation and efficiency.
Top Page Image Contents