Hunter Fan 82048, 43042-01 manual Preventative Maintenance

Page 2

! W a r n i n g

TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK, OR INJURY TO PERSONS, OBSERVE THE FOLLOWING:

1.Use this unit only in a manner intended by the manufacturer. If you have questions, contact the manufacturer.

2.Before servicing or cleaning the unit, switch power off at ser- vice panel and lock the service disconnecting means to prevent power from being switched on accidentally. when the service disconnecting means cannot be locked, securely fasten a promi- nent warning device, such as a tag, to the service panel.

3.Installation work and electrical wiring must be done by qualified person(s) in accordance with all applicable codes and standards, including fire-rated construction.

4.Sufficient air is needed for proper combustion and exhausting of gasses through the flue (chimney) of fuel burning equipment to prevent backdrafting. Follow the heating equipment manufac- turer’s guideline and safety standards,such as those published by the National Fire Prevention Association (NFPA), and the American Society for Heating, Refrigeration and Air-Conditioning

Engineers (ASHRAE), and the local code authorities.

5.When cutting or drilling into wall(s) or ceiling, do not damage electrical wiring or other hidden utilities.

6.Ducted fans must always be vented to the outdoors.

7.If this unit is to be installed over a tub or shower, it must be marked as appropriate for the application and be connected to a GFCI (Ground Fault Circuit Interrupter) - protected branch circuit.

8.Never place a switch where it can be reached from a tub or shower.

9.Install fan at least 5 feet (1.52 m) above the floor.

10.This unit must be grounded.

11.Unit must not be installed in a ceiling thermally insulated to a value greater than R40.

ENGLISH

!C A U T I O N

1.For general ventilating use only. Do not use to exhaust haz- ardous or explosive materials and vapors.

2.To avoid motor bearing damage and noisy/unbalanced impel- lers, keep drywall spray, construction dust, etc. off power unit.

3.DO NOT install this product in a wall. This product is designed for installation in ceilings up to a 12/12 pitch (45 degrees). Ductwork must point upward.

4.Please read specification label on product for further infor- mation and requirements.

!W a r n i n g

DISCONNECT ELECTRIC

POWER SUPPLY

AND LOCK OUT

SERVICE PANEL BEFORE

SERVICING UNIT

PREVENTATIVE MAINTENANCE

A clean fan provides better service. Disconnect the power supply and clean the fan as listed below.

TO CLEAN GRILLE: Use a mild detergent, such as dishwashing liquid, and a soft cloth. DO NOT use abrasive cloths, steel wool pads or scouring powders.

TO CLEAN FAN ASSEMBLY: Unplug motor cord from receptacle. To remove

motor plate, find the single tab on the motor plate (located next to the recepta- cle). Push up rear motor plate tab while pushing out on the side of the housing or insert a screwdriver into the slot in the housing (next to tab) and twist screw- driver. Gently vacuum fan, motor and interior of housing.

METAL AND ELECTRICAL PARTS SHOULD NEVER BE IMMERSED IN WATER.

MAINTENANCE

The motor is permanently lubricated and never needs oiling. If the motor bear- ings are making excessive or unusual

noises, replace the motor with the exact service motor. You should replace the impeller at the same time.

2

COOKING AREA

 

Do Not Install Above

 

Or Inside This Area

 

45°

45°

 

 

Cooking

Floor

 

 

 

Equipment

 

43042-01 02/21/2008

Page 1 Page 3
Image 2
Page 1 Page 3
Contents Installation I d e Read and Save These InstructionsPreventative Maintenance For replacements X4 aBefore Installation Choose Installation Option A14 A13A12 New Construction attaching to joistA16 A15A17 A18B12 A21 A22B11 B13 B14B18 B15B17 B16 B19B22 B24 B25C12 Existing Construction accessible from aboveB26 B27 C14 C13C15 C16C21 C19C20 C22C24 C23C25 C26D12 Existing Construction accessible only from belowC29 D13D17 D15D16 D18D20 D19D21 D22Remove the thumbscrews E12 E11E10 Trouble Shooting Warranty Limited Warranty

43042-01, 82048 specifications

The Hunter Fan 43042-01,82048 is an exemplary ceiling fan that embodies functionality, style, and innovation. This fan stands out in the market due to its exceptional performance and aesthetic appeal, making it an ideal addition to various spaces, from living rooms to bedrooms.

One of the primary features of the Hunter Fan 43042-01,82048 is its powerful motor, designed to deliver optimal airflow with minimal noise. This ensures a comfortable environment without the disruptive sounds often associated with ceiling fans. The motor is engineered for durability, contributing to the fan's long lifespan and reliability in different conditions.

The design of the Hunter Fan 43042-01,82048 is both contemporary and classic, making it a versatile choice for numerous decor styles. Available in various finishes, including brushed nickel and farmhouse white, this fan can seamlessly blend into any interior design, providing both function and flair. The sleek blades not only enhance its aesthetic appeal but are also ergonomically designed for maximum air circulation.

Another remarkable technology featured in this model is its reversible motor function. This allows the user to switch the blade direction, making it suitable for both summer and winter use. In the summer, the fan can be set to a counterclockwise rotation for a refreshing breeze, while in the winter, it can be adjusted to clockwise to circulate warm air trapped near the ceiling. This feature promotes energy efficiency year-round, potentially lowering heating and cooling costs.

The integrated LED lighting system is another advantageous characteristic of the Hunter Fan 43042-01,82048. The built-in lights provide ample illumination while being energy-efficient, ensuring that the fan not only cools the room but also brightens the space effectively. Additionally, the light kit is designed to be dimmable, allowing users to customize the ambiance according to their preferences.

Installation is made convenient with the fan's user-friendly mounting system, which accommodates standard ceilings and sloped angles. This versatility enables homeowners and renters to enjoy the benefits of this ceiling fan regardless of their ceiling layout.

In summary, the Hunter Fan 43042-01,82048 combines advanced technology, aesthetic versatility, and energy efficiency, making it a modern choice for any home. From its powerful motor and reversible functionality to integrated lighting and stylish design, this fan is poised to enhance comfort and décor in any space.
Top Page Image Contents