Uninstalling the Light Fixture
1.To uninstall the light fixture, first disconnect the plug connectors between the black wire and the black/white wire.
2.Disconnect the plug connectors between the two white wires.
3.Uninstall the nut and washer from the end of the light fixture inside the lower switch housing.
4.Unscrew the threaded rod of the light fixture from the lower switch housing.
5.Remove the light fixture from the lower switch housing pulling disconnected wires through the hole in the center of the lower switch housing.
Note: When removing the wires, pull the thin plug connector (male) through first, and then pull the other plug connector (female) through the hole.
6.Install the dummy terminals (included in the sack parts) on the two disconnected wires in the lower switch housing.
7.Install the switch housing cap and plug button to the lower switch housing.
Male Dummy
Terminal
Female Dummy
Terminal
Lower Switch
Housing
readed Rod
Steps 3 – 5
Cap
Plug Button 
Step 7
11
| Hunter Fan Company |