Chapter 3: Connections
ANALOG AUDIO – BALANCED INPUTS AND OUTPUTS
The +4 dBu balanced line inputs and outputs use an ELCO® multipin connector. The balanced in/out connector wiring scheme is as follows:
INPUTS
OUTPUTS
| Larger Key Notch |
| Note: The larger of the two outer key notches is at the bottom. |
J | Both the unbalanced and balanced inputs and outputs may be used simultaneously. |
Pin out letters are referenced to the alphabetical designation on a standard
| Channel | GND | NEG | POS | Channel | GND | NEG | POS |
| In 1 | NN | JJ | HH | Out 1 | Z | c | d |
| In 2 | CC | y | x | Out 2 | P | U | V |
| In 3 | t | n | m | Out 3 | D | J | K |
| In 4 | FF | MM | LL | Out 4 | T | M | N |
| In 5 | w | BB | AA | Out 5 | H | B | C |
| In 6 | KK | EE | DD | Out 6 | W | a | b |
| In 7 | z | v | u | Out 7 | L | R | S |
| In 8 | p | l | k | Out 8 | A | E | F |
Additional grounds: | r, s, h, j, e, f, X, and Y. |
|
|
|
® ELCO is a registered trademark of Elco Corporation - a Kyocera Group Company
24 | ADAT XT Reference Manual |