Preventative Maintenance

W a r n i n g

TO REDUCE THE RISK OF ELECTRIC SHOCK OR INJURY, OBSERVE THE FOLLOWING:

1.Use this unit only in a manner intended by the manufacturer. If you have questions, contact the manufacturer at the phone number or address listed in the warranty.

2.Before installing, servicing, or cleaning the unit, disconnect the power by turning off the circuit breakers to the outlet box and associated wall switch location. If you cannot lock the circuit breakers in the off position, securely attach a prominent warning device, such as a tag, to the service panel.

3.Installation work and electrical wiring must be done by qualified person(s) in accordance with all applicable codes and standards, including fire-rated construction codes and standards.

4.Sufficient air is needed for proper combustion and exhaust- ing of gasses through the flue (chimney) of fuel burning equipment to prevent backdrafting. Follow the heating equipment manufacturer’s guideline and safety standards,

such as those published by the National Fire Prevention Association (NFPA), and the American Society for Heating, Refrigeration and Air-Conditioning Engineers (ASHRAE), and the local code authorities.

5.When cutting or drilling into wall(s) or ceiling, do not damage electrical wiring or other hidden utilities.

6.Ducted fans must always be vented to the outdoors. Keep ducting as short and as straight as possible.

7.Acceptable for use over a bathtub or shower when connected to a GFCI protected branch circuit.

8.Install fan at least 5 feet (1.52 m) above the floor.

9.Never place a switch where it can be reached from a tub or shower.

10.This unit must be grounded.

C A U T I O N

1.For general ventilating use only. Do not use for ventilat- ing hazardous or explosive materials.

2.To avoid motor bearing damage and noisy/unbalanced impellers, keep drywall spray, construction dust, etc. off power unit.

3.DO NOT install this product in a wall. This product is designed for installation in ceilings up to a 12/12 pitch (45 degrees). Ductwork must point upward.

4.Please read specification label on product for further information and requirements.

W a r n i n g

DISCONNECT

ELECTRIC

POWER SUPPLY AND LOCK OUT SERVICE PANEL BEFORE SERVICING UNIT

A clean fan provides better service. Disconnect the power supply and clean the fan as listed below.

TO CLEAN GRILLE: Use a mild detergent, such as dishwashing liquid, and a soft cloth. DO NOT use abrasive cloths, steel wool pads or scouring powders.

TO CLEAN FAN ASSEMBLY: Unplug motor cord from receptacle. To remove motor plate, find the single tab on the motor plate (located next to the receptacle). Push up rear motor plate tab while pushing out on the side of the housing or insert a screw- driver into the slot in the housing (next to tab) and twist screwdriver. Gently vacuum fan, motor and interior of housing.

METAL AND ELECTRICAL PARTS SHOULD NEVER BE IMMERSED IN WATER.

MAINTENANCE

The motor is permanently lubricated and never needs oiling. If the motor bearings are making excessive or unusual noises, replace the motor with the exact service motor. You should replace the impeller at the same time.

2	41946-01 3/29/2006

05-HF-017-EngS_3.29.06.indd 2

3/29/06 6:54:45 PM

82004 specifications

The Hunter Fan 82004 is a remarkable ceiling fan that embodies a perfect blend of function, style, and energy efficiency. Designed to enhance any indoor space, this fan stands out with its modern aesthetic and advanced technology.

One of the key features of the Hunter Fan 82004 is its powerful motor. The fan is equipped with a WhisperWind motor, which provides exceptional airflow while operating virtually silently. This innovative technology ensures that you stay cool and comfortable without the disruptive noise that can be typical of other fans. The WhisperWind motor operates with three speed settings, empowering users to choose their preferred cooling level according to the season and their specific needs.

The design of the Hunter Fan 82004 is another highlight. It features a sleek, contemporary look that can complement a variety of home decors. Available in multiple finish options, including brushed nickel and an elegant walnut finish, it can easily blend into both modern and traditional environments. The fan's blades are also carefully crafted to ensure optimal air circulation, enhancing its performance and visual appeal.

Installation of the Hunter Fan 82004 is straightforward, thanks to its user-friendly design and included mounting hardware. It is compatible with most standard ceiling heights and can be adapted for sloped ceilings, making it versatile enough for nearly any room in the house. The fan also comes equipped with a pull chain, providing easy access to adjustments for both speed and light settings.

Additionally, the Hunter Fan 82004 is energy efficient, contributing to lower electricity bills while still delivering high performance. This fan is designed with a focus on sustainability, making it an eco-friendly choice for consumers who are conscious of their energy consumption.

Another standout characteristic of the Hunter Fan 82004 is its integrated lighting. Many models feature a built-in light kit that provides enhanced illumination without sacrificing style. This functionality allows you to use the fan as a primary light source, further increasing its utility in your living space.

In summary, the Hunter Fan 82004 is a top-tier ceiling fan that combines advanced technology, stylish design, and energy efficiency. With its powerful WhisperWind motor, sleek aesthetic, easy installation, and integrated lighting options, it is a valuable addition to any room, enhancing comfort and ambiance while making a positive environmental impact.