Existing Construction
B11 | EXISTING FAN |
B12
E |
Remove an existing fan and check to make sure the open- | Move the housing into position above the ceiling. |
ing is large enough to accommodate the new motor hous- |
|
ing (7 1/4”x 7 3/4”). |
|
B13
Route wires through strain relief.
B14 |
2 |
1 |
Attach existing ducting to duct connector. Tape joints.
If ducting does not fit securely,
an adapter may need to be purchased.
B15 |
E |
Screw
8
05-HF-017-EngS_3.29.06.indd 8
3/29/06 6:54:59 PM