ZMU17MXL | English |
Building In Instructions
1.Remove the contents of the cabinet and adjacent cabinets.
2. Mount the cabinet on the wall, check that it is solid and measure it. Check the location of mains sockets.
3.The holes may be bored from inside the cabinet or from the underside of the cabinet.
Drilling inside the cabinet:
Mark the holes inside the cabinet according to the sketch. The distance a from the edge of the carcass depends on the thickness of the front of the cabinet d. Select a value for a depending on the thickness of the front of your cabinet, such that the fronts of the microwave and of the cabinet are aligned.
td
d | a |
|
|
|
|
16 | 79 | mm |
19 | 76 | mm |
22 | 73 | mm |
|
|
|
5.5 mm
ø
18