Intel Intel Desktop Board, DG35EC manual Lead-free 2LI/Pb-free 2LI Board

Page 70

Intel Desktop Board DG35EC Product Guide

Lead-free 2LI/Pb-free 2LI Board

The electronics industry is transitioning to European Union (EU) Restriction of Hazardous Substances (RoHS)-compliant products. The RoHS legislation restricts the use of six materials. One of these restricted materials is lead. Lead is the most common and problematic of the RoHS restricted materials.

There are exemptions in RoHS that allow the use of lead in some very limited locations in electronic products. Maximum lead concentration values have been established for RoHS-compliant electronic products that allow up to 1000 ppm of lead.

Lead-free/Pb-free is a nickname that is often used (or misused) for RoHS-compliant products. In this case, the term "Lead-free/Pb-free" means that lead has been removed where required by the RoHS legislation but still may exist as an impurity below 1000 ppm.

The term "Lead-free 2LI/Pb-free 2LI" means lead-free second level interconnect (2LI). The balls, leads, or pads used to connect the component to a printed circuit board are lead-free, but the first level interconnect (FLI) is not lead-free. The use of lead in the FLI is acceptable because of the RoHS "flip chip" or "die bump" interconnect exemption.

Desktop Board DG35EC is a lead-free second level interconnect product. Table 17 shows the lead-free second level interconnect marks as they appear on the board and accompanying collateral. These marks are based on JEDEC standard J-STD-609, “Marking and Labeling of Components, PCBs and PCBAs to Identify Lead, Lead Free and Other Attributes.”

For more information concerning Intel’s lead-free initiatives, refer to http://www.intel.com/technology/silicon/leadfree.htm.

70

Image 70
Contents Intel Desktop Board DG35EC Product Guide Canadian Department of Communications Compliance Statement Revision HistoryFCC Declaration of Conformity DisclaimerUse Only for Intended Applications PrefaceIntended Audience Document OrganizationIntel Desktop Board DG35EC Product Guide TerminologyTerm Description Contents Error Messages and Indicators Contents FiguresTables Desktop Board Features Feature SummaryManagement Power ManagementHardware LAN SupportDesktop Board Features Desktop Board ComponentsLabel Description Processor Main MemoryIntel G35 Express Chipset Intel G35 Graphics SubsystemAudio Subsystem Legacy Input/Output I/O Controller LAN Status IndicatorsLAN Subsystem Serial ATA Hi-Speed USB 2.0 SupportEnhanced IDE Interface LED Color LED State IndicatesSecurity Passwords Serial ATA and IDE Auto ConfigurationPCI and PCI Express* Auto Configuration ExpandabilityHardware Monitoring and Fan Speed Control Hardware Management FeaturesChassis Intrusion Power Connectors Power Management FeaturesHardware Support Fan Headers LAN Wake CapabilitiesInstantly Available PC Technology +5 V Standby Power Indicator Location of the +5 V Standby Power IndicatorReal-Time Clock BatterySpeaker Energy STAR* QualifiedIntel Desktop Board DG35EC Product Guide Installing and Replacing Desktop Board Components Before You BeginPrevent Power Supply Overload Installation PrecautionsObserve Safety and Regulatory Requirements Installing the I/O Shield Installing and Replacing Desktop Board ComponentsInstalling and Removing the Desktop Board Desktop Board DG35EC Mounting Screw Hole LocationsInstalling and Removing a Processor Installing a ProcessorLift the Load Plate Remove the Processor from the Protective Processor Cover Installing a Processor Fan Heat Sink Close the Load PlateConnecting the Processor Fan Heat Sink Cable Removing the ProcessorGuidelines for Dual Channel Memory Configuration Installing and Removing MemoryTwo or Four DIMMs Dual Channel Memory Configuration with Four DIMMs Three DIMMsInstalling DIMMs Use DDR2 DIMMsInstalling a Dimm Removing DIMMs Installing and Removing a PCI Express x16 Card Installing a PCI Express x16 CardRemoving the PCI Express x16 Card Removing a PCI Express x16 CardConnecting the Diskette Drive Cable Connecting the Diskette Drive CableConnecting the IDE Cable Connecting the IDE CableConnecting Serial ATA Sata Cables Connecting a Serial ATA CableConnecting to the Internal Headers and Connectors Internal HeadersPin Signal Name Pdif ConnectorPdif Connector Signal Names Front Panel Audio HeaderSerial Port Header Ieee 1394a HeaderFront Panel Header USB 2.0 Header Signal Names Alternate Front Panel Power LED HeaderAlternate Front Panel Power LED Header USB 2.0 HeadersChassis Intrusion Header Connecting to the Onboard Audio SystemConnector Channel Function Chassis Intrusion HeaderConnecting Chassis Fan and Power Supply Cables Chassis Fan CablesPower Supply Cables Connecting Power Supply CablesSetting the Bios Configuration Jumper Location of the Bios Configuration Jumper BlockJumper Settings for the Bios Setup Program Modes Clearing PasswordsJumper Setting Mode Description Replacing the Battery PrecautionVaro Προσοχή Pozor Removing the Battery Intel Desktop Board DG35EC Product Guide Updating the Bios Updating the Bios with the Intel Express Bios Update UtilityObtaining the Bios Update File Updating the Bios with the ISO Image Bios Update FileUpdating the Bios with the Iflash Memory Update Utility Updating the BiosRecovering the Bios Bios Error Messages Error Messages and IndicatorsBios Beep Codes Bios Error MessagesIntel Desktop Board DG35EC Product Guide Safety Standards Safety StandardsPlace Battery Marking Regulatory ComplianceEuropean Union Declaration of Conformity Statement Recycling Considerations Product Ecology StatementsRegulatory Compliance Français DeutschEspañol MalayRussian PortugueseTürkçe Lead-free 2LI/Pb-free 2LI Board Lead-Free Second Level Interconnect Marks Restriction of Hazardous Substances RoHSEU RoHS Description MarkChina RoHS China RoHS Environmentally Friendly Use Period MarkRegulatory Compliance EMC Regulations EMC RegulationsRegulation Class B Title Ensure Electromagnetic Compatibility EMC Compliance Board-Level Certification Markings Product CertificationsProduct Certification Markings Chassis and Component Certifications EuropeIntel Desktop Board DG35EC Product Guide

DG35EC, Intel Desktop Board specifications

The Intel Desktop Board DG35EC is a versatile and reliable motherboard designed for the Intel Core 2 Processor family. Launched in the mid-2000s, it became known for its solid performance and robust feature set aimed at both general computing and home entertainment needs.

One of the standout features of the DG35EC is its support for the Intel Core 2 Duo and Core 2 Quad processors. With LGA775 socket compatibility, it allows users to take advantage of the multi-core architecture for improved multitasking capabilities and overall performance. The board supports a maximum memory capacity of 8GB using DDR2 RAM, offering dual-channel architecture for enhanced memory bandwidth, which is crucial for tasks that require significant data processing.

The DG35EC is built with Intel's G35 Express chipset, which integrates several key technologies to enhance user experience. This chipset combines graphics and memory functionality, allowing for seamless multimedia playback and enabling support for DirectX 10. The integrated Intel Graphics Media Accelerator X3000 delivers decent graphics performance for day-to-day applications and light gaming, which was impressive at the time of its release.

This desktop board also boasts a suite of connectivity options. It features six SATA 3Gb/s ports for fast data transfer with compatible hard drives and SSDs, enhancing system responsiveness. Additionally, it includes a wide array of USB 2.0 ports, enabling users to connect multiple peripherals, such as external storage devices, printers, and keyboards without the need for expansion cards.

For audio capabilities, the DG35EC is equipped with Intel High Definition Audio, providing immersive sound quality for multimedia applications and improved audio fidelity for high-definition content. This feature was particularly appealing for users who enjoyed media consumption on their desktop systems.

The board is also designed with various expansion slots, including PCI Express x16 for graphics cards, and several PCI slots for legacy devices, thus ensuring compatibility with a wide range of hardware. The compact ATX form factor makes it suitable for a variety of cases while providing sufficient room for expansion.

Overall, Intel's DG35EC Desktop Board stands out for its reliable performance and feature set tailored for everyday computing and multimedia applications, making it a solid choice for users looking to build a functional and efficient desktop system.