Intel DG35EC manual Error Messages and Indicators, Bios Beep Codes, Bios Error Messages

Page 63

A Error Messages and Indicators

Desktop Board DG35EC reports POST errors in two ways:

By sounding a beep code

By displaying an error message on the monitor

BIOS Beep Codes

The BIOS also issues a beep code (one long tone followed by two short tones) during POST if the video configuration fails (a faulty video card or no card installed) or if an external ROM module does not properly checksum to zero. Table 14 lists the BIOS codes.

Table 14. Beep Codes

Beep

Description

 

 

3

No memory

 

 

Siren

Processor overheat (on reboot)

 

 

BIOS Error Messages

When a recoverable error occurs during the POST, the BIOS displays an error message describing the problem. Table 15 gives an explanation of the BIOS error messages.

Table 15. BIOS Error Messages

Error Message

Explanation

 

 

PROCESSOR_THERMAL_TRIP_ERROR

Processor was previously shutdown due to a thermal event

 

(overheating).

 

 

MULTI_BIT_ECC_ERROR

The firmware has detected that a Multi-Bit ECC Error occurred.

 

 

SINGLE_BIT_ECC_ERROR

The firmware has detected that a Single-Bit ECC Error occurred.

 

 

CMOS_BATTERY_ERROR

The firmware has detected that a CMOS battery failure occurred.

 

 

CMOS_CHECKSUM_ERROR

The firmware has detected that a CMOS Checksum Error occurred.

 

 

CMOS_TIMER_ERROR

The firmware has detected that the system date/time has not

 

been set.

 

 

MEMORY_SIZE_DECREASE_ERROR

The firmware has detected that the system memory has

 

decreased.

 

 

INTRUDER_DETECTION_ERROR

The system chassis was opened.

 

 

SPD_TOLER_ERROR

SERIAL PRESENCE DETECT (SPD) device data missing or

 

inconclusive. Properly programmed SPD device data is required

 

for reliable operation.

 

 

MEM_OPTIMAL_ERROR

The installed amount of memory in Channel A is not equal to the

 

amount of memory in Channel B. Maximum memory performance

 

is achieved with equal amounts of memory installed in each

 

channel.

 

 

63

Image 63
Contents Intel Desktop Board DG35EC Product Guide Disclaimer Revision HistoryFCC Declaration of Conformity Canadian Department of Communications Compliance StatementDocument Organization PrefaceIntended Audience Use Only for Intended ApplicationsTerminology Intel Desktop Board DG35EC Product GuideTerm Description Contents Error Messages and Indicators Figures ContentsTables Feature Summary Desktop Board FeaturesLAN Support Power ManagementHardware ManagementDesktop Board Components Desktop Board FeaturesLabel Description Main Memory ProcessorIntel G35 Graphics Subsystem Intel G35 Express ChipsetAudio Subsystem LAN Status Indicators Legacy Input/Output I/O ControllerLAN Subsystem LED Color LED State Indicates Hi-Speed USB 2.0 SupportEnhanced IDE Interface Serial ATAExpandability Serial ATA and IDE Auto ConfigurationPCI and PCI Express* Auto Configuration Security PasswordsHardware Management Features Hardware Monitoring and Fan Speed ControlChassis Intrusion Power Management Features Power ConnectorsHardware Support LAN Wake Capabilities Fan HeadersInstantly Available PC Technology Location of the +5 V Standby Power Indicator +5 V Standby Power IndicatorEnergy STAR* Qualified BatterySpeaker Real-Time ClockIntel Desktop Board DG35EC Product Guide Before You Begin Installing and Replacing Desktop Board ComponentsInstallation Precautions Prevent Power Supply OverloadObserve Safety and Regulatory Requirements Installing and Replacing Desktop Board Components Installing the I/O ShieldDesktop Board DG35EC Mounting Screw Hole Locations Installing and Removing the Desktop BoardInstalling a Processor Installing and Removing a ProcessorLift the Load Plate Remove the Processor from the Protective Processor Cover Close the Load Plate Installing a Processor Fan Heat SinkRemoving the Processor Connecting the Processor Fan Heat Sink CableInstalling and Removing Memory Guidelines for Dual Channel Memory ConfigurationTwo or Four DIMMs Three DIMMs Dual Channel Memory Configuration with Four DIMMsUse DDR2 DIMMs Installing DIMMsInstalling a Dimm Removing DIMMs Installing a PCI Express x16 Card Installing and Removing a PCI Express x16 CardRemoving a PCI Express x16 Card Removing the PCI Express x16 CardConnecting the Diskette Drive Cable Connecting the Diskette Drive CableConnecting the IDE Cable Connecting the IDE CableConnecting a Serial ATA Cable Connecting Serial ATA Sata CablesInternal Headers Connecting to the Internal Headers and ConnectorsFront Panel Audio Header Pdif ConnectorPdif Connector Signal Names Pin Signal NameIeee 1394a Header Serial Port HeaderFront Panel Header USB 2.0 Headers Alternate Front Panel Power LED HeaderAlternate Front Panel Power LED Header USB 2.0 Header Signal NamesChassis Intrusion Header Connecting to the Onboard Audio SystemConnector Channel Function Chassis Intrusion HeaderChassis Fan Cables Connecting Chassis Fan and Power Supply CablesConnecting Power Supply Cables Power Supply CablesLocation of the Bios Configuration Jumper Block Setting the Bios Configuration JumperClearing Passwords Jumper Settings for the Bios Setup Program ModesJumper Setting Mode Description Precaution Replacing the BatteryVaro Προσοχή Pozor Removing the Battery Intel Desktop Board DG35EC Product Guide Updating the Bios with the Intel Express Bios Update Utility Updating the BiosUpdating the Bios with the ISO Image Bios Update File Obtaining the Bios Update FileUpdating the Bios Updating the Bios with the Iflash Memory Update UtilityRecovering the Bios Bios Error Messages Error Messages and IndicatorsBios Beep Codes Bios Error MessagesIntel Desktop Board DG35EC Product Guide Regulatory Compliance Safety StandardsPlace Battery Marking Safety StandardsEuropean Union Declaration of Conformity Statement Product Ecology Statements Recycling ConsiderationsRegulatory Compliance Malay DeutschEspañol FrançaisPortuguese RussianTürkçe Lead-free 2LI/Pb-free 2LI Board Description Mark Restriction of Hazardous Substances RoHSEU RoHS Lead-Free Second Level Interconnect MarksChina RoHS Environmentally Friendly Use Period Mark China RoHSRegulatory Compliance EMC Regulations EMC RegulationsRegulation Class B Title Ensure Electromagnetic Compatibility EMC Compliance Product Certifications Board-Level Certification MarkingsProduct Certification Markings Europe Chassis and Component CertificationsIntel Desktop Board DG35EC Product Guide

DG35EC, Intel Desktop Board specifications

The Intel Desktop Board DG35EC is a versatile and reliable motherboard designed for the Intel Core 2 Processor family. Launched in the mid-2000s, it became known for its solid performance and robust feature set aimed at both general computing and home entertainment needs.

One of the standout features of the DG35EC is its support for the Intel Core 2 Duo and Core 2 Quad processors. With LGA775 socket compatibility, it allows users to take advantage of the multi-core architecture for improved multitasking capabilities and overall performance. The board supports a maximum memory capacity of 8GB using DDR2 RAM, offering dual-channel architecture for enhanced memory bandwidth, which is crucial for tasks that require significant data processing.

The DG35EC is built with Intel's G35 Express chipset, which integrates several key technologies to enhance user experience. This chipset combines graphics and memory functionality, allowing for seamless multimedia playback and enabling support for DirectX 10. The integrated Intel Graphics Media Accelerator X3000 delivers decent graphics performance for day-to-day applications and light gaming, which was impressive at the time of its release.

This desktop board also boasts a suite of connectivity options. It features six SATA 3Gb/s ports for fast data transfer with compatible hard drives and SSDs, enhancing system responsiveness. Additionally, it includes a wide array of USB 2.0 ports, enabling users to connect multiple peripherals, such as external storage devices, printers, and keyboards without the need for expansion cards.

For audio capabilities, the DG35EC is equipped with Intel High Definition Audio, providing immersive sound quality for multimedia applications and improved audio fidelity for high-definition content. This feature was particularly appealing for users who enjoyed media consumption on their desktop systems.

The board is also designed with various expansion slots, including PCI Express x16 for graphics cards, and several PCI slots for legacy devices, thus ensuring compatibility with a wide range of hardware. The compact ATX form factor makes it suitable for a variety of cases while providing sufficient room for expansion.

Overall, Intel's DG35EC Desktop Board stands out for its reliable performance and feature set tailored for everyday computing and multimedia applications, making it a solid choice for users looking to build a functional and efficient desktop system.