TC electronic SDN BHD Home Stereo System Center, Contour Style, Reference Level, Type Selector

Center

E N G L I S H

Contour Style

Parameter range: Off and a selection of styles.

Select between different styles as processing for the center channel output.

Reference Level

Parameter range: -25 to 0dB

Set the Ref. Level control at the approximate reference level of the input signal. For a typical level, set Ref. Level at -10 to -18dB. With a full scale digital Input, Ref. Level would be set high, typically 0 to -12dB. With a quiet or highly dynamic input, set it between -15 and -25dB.

EQ

The EQ for the center channel features four-band parametric EQ with high- and low- pass filters switchable between Notch, Parametric, Shelving and Cut filters.

Basic operation

•Select Freq, Gain or Type to access the same parameter for the four EQ bands.

•Select Lo or Hi to access the three parameters for the individual EQ band.

•Press Bypass EQ to bypass the entire EQ.

Bypass does not affect the selected Contour Style.

Type Selector

•Press Type and use faders 1-4 to select filter types. For Lo and Hi filters select between filter types: Parametric, Notch, Shelve and Cut.

8 / UNWRAP -TDM