Faber 6048624 installation instructions Prepare the Wall, Install the Rangehood

Page 6

PREPARE THE WALL

1.Disconnect and move freestanding range from cabi- net opening to provide easier access to upper cabinet and rear wall. Put a thick, protective covering over cooktop, set-in range or countertop to protect from damage or dirt.

2.Determine and clearly mark with a pencil the center line on the cabinet where the rangehood will be installed.

3.Determine and make all necessary cuts in the wall for the ductwork. Install the ductwork before the rangehood.

4.Determine the proper location for the Power Supply Cable. Use a 1 1/4" Drill Bit to make this hole. Install the cable. Use caulking to seal around the hole. DO NOT turn on the power until installation is complete.

5.Make the cut-out opening where the rangehood will be installed (FIGURE 5).

CUT-OUT

 

13 5/32"

 

275/8"

FIGURE 5

INSTALL THE RANGEHOOD

1.Remove the rangehood from the carton and place on a flat surface. Cover the surface to prevent accidental damage. Remove all parts including the backdraft damper, plastic grille and literature package before discarding the carton.

2.Remove the grease filters from the rangehood and set aside. The grease filters are removed by pressing the handle of the filter as indicated in FIGURE 6. When replacing, make sure that the filters are properly positioned with the handles in front and visible.

FIGURE 6

3.Place the round damper into the exhaust opening of the rangehood and press down.

4.The rangehood mounts to the cabinet by two spring loaded brackets, one on each side of the rangehood. Lift the rangehood into the cutout opening in the cabinet. Be careful not to damage the cabinet, rangehood or other appliances.

5.Tighten the rangehood to the cabinet by rotating the screws indicated in FIGURE 7 with a phillips screw driver.

FIGURE 7

6.Remove the cover from the field wiring compartment with a phillips screwdriver. Feed the Power Supply Cable through the electrical knockout. Connect the Power Supply Cable to the rangehood cable. Attach the White lead of the power supply to the White lead of the rangehood with a twist-on type wire connector. Attach the Black lead of the power supply to the Black lead of the rangehood with a twist-on type wire connector. AttachthePowerSupplyCablegroundingleadtothegreenscrew provided. Using the 4 holes provided screw the field wiring compartment to the wall or cabinet as dictated by your Power Supply Cable location (screws not provided). Replace the cover.

7.Replace the grease filters.

8.Connect the ductwork to the damper and seal all connec- tions with duct tape.

9.Turn the power supply on. Turn on the blower and light. If the rangehood does not operate, check that the circuit breaker is not tripped or the house fuse blown. If the unit still does not operate, disconnect the power supply and check that the wiring connections have been made properly.

Version Hi-Lo 02/04 - Page 6

Page 5 Page 7
Image 6
Page 5 Page 7
Contents Lisez Bien Cette Fiche Avant Dinstaller LA Hotte Read and Save These InstructionsVenting Requirements Electrical RequirementsFor residential use only Règlements Dévacuation Fiche Technique ÉlectriqueUniquement pour usage menager Rangehood and CUT-OUT Dimensions Recirculating Installations Plan Your DuctworkInstall the Rangehood Prepare the WallWarranty & Service USE and Care Information

6048624 specifications

The Faber 6048624 is a highly acclaimed range hood designed to enhance kitchen functionality while complementing modern décor. Known for its efficiency and cutting-edge features, the Faber 6048624 exemplifies the perfect blend of style and performance, making it a preferred choice for homeowners and professional chefs alike.

One of the standout features of the Faber 6048624 is its powerful extraction capacity. It utilizes a robust motor to efficiently remove smoke, grease, and odors from the kitchen, ensuring clean air circulation. With adjustable air flow settings, users can tailor ventilation according to their cooking needs, providing versatility for everything from simmering sauces to frying meats.

The design of the Faber 6048624 is both sleek and functional, available in various finishes to suit different kitchen styles. Its minimalist aesthetic allows it to seamlessly integrate into any kitchen environment, whether it be contemporary or transitional. Furthermore, its space-saving design can be mounted under cabinets or as a standalone unit, maximizing kitchen space.

In considerations of technology, this range hood boasts advanced noise reduction features. Many users appreciate the quiet operation of the Faber 6048624, which allows kitchen conversations to flow uninterrupted while maintaining efficient ventilation. This low-noise technology is a significant benefit for open-concept living spaces.

Additionally, the Faber 6048624 includes innovative LED lighting that illuminates the cooking surface, enhancing visibility and safety while preparing meals. This feature not only improves the cooking experience but also adds an aesthetic touch to the kitchen.

Maintenance is also a crucial aspect of the Faber 6048624. It is equipped with easy-to-clean filters that can be removed and washed, promoting hygiene and ensuring optimal performance over time. The filter indicators provide reminders for when the filters need to be cleaned or replaced, taking the guesswork out of maintenance.

Overall, the Faber 6048624 stands out due to its effective design, impressive extraction capabilities, modern aesthetics, and user-friendly features. It is perfect for those looking to invest in a quality range hood that combines style with functionality, making kitchen chores easier and more efficient. Whether you are an amateur cook or a culinary expert, the Faber 6048624 is sure to enhance your cooking experience.
Top Page Image Contents