Faber 36 installation instructions Item R in Figure, For Ductless Installations

Page 7

5.Level the canopy. The height and level of the canopy can be adjusted by rotating the adjustment screws

(Item R in FIGURE

9) on each side of the blower inside the rangehood

FIGURE 9

6.Connect the Power Supply Cable to the rangehood. At- tach the White lead of the power supply to the White lead of the rangehood with a twist-on type wire connector. Attach the Black lead of the power supply to the Black lead of the rangehood with a twist-on type wire connector. Connect the Green (Green and Yellow) ground wire under the Green grounding screw.

7.Replace the field wiring compartment cover and the grease filters

8.For ducted installations, the damper must be attached to the exhaust opening on the top of the canopy. Connect the ductwork and seal all connections with duct tape.

FOR DUCTLESS INSTALLATIONS

Do not use the damper for ductless installations. The UPPER CHIMNEY COVER must be installed first, before the LOWER CHIMNEY DUCTLESS.

Ductless installations require a Ductless Conversion Kit. This kit consists of a LOWER CHIMNEY DUCTLESS (A in FIGURE 10) with holes for the exhaust air, a DUCTLESS DIVERTER (C), two VENT GRIDS (B) to cover the holes in the chimney cover, and two CHARCOAL FILTERS (D). The DUCTLESS DIVERTER must be installed before the LOWER CHIMNEYDUCTLESS is attached (as indicated bythearrow in FIGURE 10). The LOWER CHIMNEY COVER without holes should be discarded.

FIGURE 10

Once the LOWER CHIMNEY DUCTLESS with holes is installed, the VENT GRIDS (B) are inserted into the holes (FIGURE 11).

FIGURE 11

Attach the CHARCOAL FILTERS to both sides of the blower (as indicated in FIGURE 12). Install the grease filters.

FIGURE 12

9.Install the black chimney clips (K) into the holes located on the left and right of the duct on the top of the body. The chimney must be attached to the body of the rangehood, as indicated in FIGURE 13. The UPPER CHIMNEY COVER

(C) must be installed first, then the LOWER CHIMNEY COVER (B) wraps around it. Both sections are secured to the wall under the CHIMNEY MOUNTING BRACKETS (H). Secure the UPPER CHIMNEY COVER to the MOUNTING BRACKETS with the CHIMNEY SCREWS (J). Secure the LOWER CHIMNEY COVER to the CANOPY (A) by inserting the flanges at the bottom of the LOWER CHIMNEY COVER into the slots on the top of the CANOPY. Insert 2 chimney screws at the bottom of the lower Chimney.

K

FIGURE 13

10.Turn the power supply on. Turn on blower and light. If the rangehood does not operate, check that the circuit breaker is not tripped or the house fuse blown. If the unit still does not operate, disconnect the power supply and check that the wiring connections have been made properly.

Version 04/08 - Page 7

Page 6 Page 8
Image 7
Page 6 Page 8
Contents Read and Save These Instructions Lisez Bien Cette Fiche Avant Dinstaller LA HotteFor residential use only Venting RequirementsDuctwork Electrical RequirementsUniquement pour usage menager Installations pour régions à climat froidRèglements Dévacuation Fiche Technique ÉlectriqueDuctless Conversion Kit Kit Pour Conversion Du Conduit Replacement Charcoal Filters/ Filtres au CharbonHigh Backsplash/Dosseret 24 po High Backsplash/Dosseret 30 poRangehood Assembly Plan the InstallationCalculate the Ductrun Length Are Securely Fastened to the Wall Prepare the WallItem R in Figure For Ductless InstallationsUSE and Care Information Faber Warranty & Service Save for Your Records Calcul DE Longueur DU Conduit Assemblage DE LA Hotte Plan D’INSTALLATIONPlan DE L’INSTALLATION AVERTISSEMENT! Avant DE FaireSont Bien Installées AU MUR Installation DE LA HottePréparation DU MUR De chaque côté du ventilateur Installations Sans ConduitUtilisation ET Entretien Faber Garantie et service

36 specifications

The Faber 36 is a cutting-edge device designed for efficiency and performance in modern applications. Renowned for its sleek design and advanced technology, the Faber 36 stands out in the market for its unique features that cater to both professionals and tech enthusiasts.

One of the main features of the Faber 36 is its powerful processing capability. It is equipped with a high-speed processor, allowing it to handle complex tasks effortlessly. This makes it ideal for activities such as video editing, gaming, and data analysis. The device boasts a generous amount of RAM, ensuring seamless multitasking without lag, enhancing overall productivity.

Another significant characteristic of the Faber 36 is its display technology. The device features a vibrant, high-resolution screen that delivers sharp images and vivid colors. This makes it perfect for content creators who require accurate color representation for their projects. Additionally, the display is designed to reduce eye strain, making it comfortable for prolonged use.

In terms of connectivity, the Faber 36 does not disappoint. It includes multiple ports for various peripherals, including USB-C and HDMI, enabling users to connect external devices easily. Wi-Fi 6 technology ensures fast and reliable internet connectivity, making it suitable for online gaming, streaming, and cloud-based applications.

The Faber 36 also prioritizes user experience with its intuitive interface. Designed for ease of use, the device features a customizable dashboard that allows users to access their favorite applications and tools quickly. The integration of advanced AI technology enhances functionality, providing smart suggestions and automating routine tasks, thus saving valuable time.

Battery life is another area where the Faber 36 excels. Equipped with an efficient power management system, it offers extended usage on a single charge, making it perfect for users on the go. Fast charging capabilities ensure minimal downtime, allowing users to stay productive throughout the day.

Lastly, Faber prioritizes sustainability, with the Faber 36 constructed from eco-friendly materials. This commitment to environmental responsibility reflects in its design and packaging, making it a choice for consumers who value ecological impact.

In summary, the Faber 36 combines power, efficiency, and sustainability into a single device. With its robust processing capabilities, vibrant display, comprehensive connectivity options, intuitive interface, long battery life, and eco-friendly design, it caters to the diverse needs of users, making it a standout choice in today’s technology landscape.
Top Page Image Contents