If the cooker hood does not function

Cleaning the motor cover

It is also possible to clean the motor cover (Fig. 2):

•Remove the grease filter.

€Remove the inlet ring (A) by turning it anti-

clockwise.

•Remove the fan wheel by unscrewing the centre nut

(B) on the fan wheel.

Use gloves when removing the fan wheel. Clean all the plastic and metal parts with warm water and washing dergent. Replace in reverse order.

Changing the light

Turn off the power before changing the light.

•Remove the lampglass by pushing the two snaps

forwards (Fig. 3).

€Replace the damaged part with one of equal rating.

To remove the light without damaging it, place a finger on the end of the light and pull gently.

Cleaning/changing the carbon filter

Unlike other carbon filters, the LONG LIFE carbon filter can be cleaned and reactivated. The filter should be cleaned every other month if used normally. The filter is best cleaned in a dishwasher at the highest temperature using normal washer detergent. The filter should be washed on its own to prevent particles of food from fastening in it and then causing an unpleasant smell later on. To reactivate the carbon the filter should be dried in the oven. Chose upper/lower heat and maximum 100° C and dry the filter for 10 minutes. Read also the filter instructions.

The filter should be changed after about 3 years as its ability to absorb smells has reduced by then. The filter insert is removed from the frame and is replaced with a new one (according to the filter instructions).

Fig. 2

1	2

Fig. 3

Before calling for service

Check the plug is correctly connected to the wall socket. Check the fuse. Do not attempt any repairs yourself that are likely to lead to further damage. If the problem remains, contact your dealer or an approved service company. Remember to save your purchase receipt and warranty card (only used in some countries).

Service and spare parts

Your dealer or service company will supply you with service and spare parts. Be sure you have the product number and model name at hand when ordering service or parts.

Changing the cord

If the cord to the cooker hood is damaged it must be replaced by an approved service company. This is because special tools are required for the job.

QC 520, QC 620, QC 720 specifications

Husqvarna, a leader in outdoor power products, offers a robust range of commercial and residential equipment, including the innovative Husqvarna QC 620, QC 520, and QC 720 chargers. These models are designed to complement Husqvarna's professional battery platform, ensuring quick, efficient charging solutions for a variety of applications.

The Husqvarna QC 620 is engineered for high-capacity charging needs. It accommodates up to two batteries simultaneously, reducing downtime for users who require constant power in their operations. This charger is known for its quick charging capability, allowing batteries to reach a full charge faster than standard alternatives. The QC 620 is compatible with a wide range of Husqvarna batteries, making it a versatile choice for professionals and homeowners alike. Its intelligent charging system monitors the state of the battery and adjusts the charging speed accordingly, preventing overheating and prolonging battery life.

Next is the QC 520, which offers a similar dual battery charging feature with slightly reduced power output compared to the QC 620. This model targets users with moderate charging needs and is perfect for those who own a few essential Husqvarna battery-powered tools. The QC 520 uses advanced technology to optimize the charging process, ensuring that batteries are ready when needed. It is lightweight and compact, making it easy to transport between job sites or store in a garage or shed.

The QC 720 stands out with its robust performance and multi-battery charging capabilities. Designed specifically for intensive use environments, it can charge up to four batteries at once, making it ideal for commercial operations with multiple tools that need to be in constant use. The QC 720 features smart technologies that provide clear information on charging status and battery health, allowing users to manage their power tools efficiently.

All three chargers are designed with safety in mind, incorporating overcharge protection and temperature control features. This commitment to safety ensures that users can rely on their equipment without worrying about damaging battery cells. Husqvarna's QC line exemplifies innovation and reliability, making these chargers a valuable addition to any toolkit for professionals or dedicated DIYers. With their advanced charging capabilities, these models enhance productivity, reduce waiting times, and support Husqvarna's mission of creating sustainable power solutions for outdoor work.