Grace GDI-IRDT200 manual Quickstart Guide 1st time Wireless Set Up

Page 7

7

QUICKSTART GUIDE - 1st time WIRELESS Set Up

A broadband internet connection is required. You can connect to your broadband internet with: 1.) Wireless (Wi-Fi) modem or router connected to your broadband (cable or DSL) internet

2.) Wired LAN line connected to your broadband (cable or DSL) internet

NOTE: IF your wireless (Wi-Fi) network is password (WEP or WPA) protected, please obtain your password before proceeding to Step 1. All passwords are UPPER and lower case sensitive.

Step 1: Connect your tuner to your stereo system. Depending on the available connections on your stereo system, you may connect to your stereo using the tuner’s RCA (L/R), Digital Coaxial or Digital Optical TOSLINK connection. You may also connect to your headphones directly.

Step 2: Turn the master power switch ON at the back of the tuner. Plug the jack from the power cord into the back of the tuner and the other end into a wall outlet. The LED located above the “Power” on the front panel will light red when in standby and turn off when the unit is actively powered. The display should turn on within approximately 4 seconds and the LED should turn off. The messages that are briefly displayed will be ‘Grace Digital Tuner’, ‘Starting…’ then ‘Scanning’.

NOTE: If your tuner does not automatically start scanning when plugged into power the 1st time, please press the power button to turn your tuner on and to view the main Internet tuner menu. Scroll left and right using the large ‘Tune/Select’ dial’ until the word ‘Settings’ is highlighted. Press the large dial inwards to select ‘Settings’. On the top of the next screen select ‘Network Configurations’ by pressing the large dial inwards. (At any time, to go back to a previous selection, press the ‘back’ button on the tuner). On the top of the next screen select ‘Scan for Networks’ by pressing the large dial inwards.

Step 3: The tuner is now scanning for available Wi-Fi (wireless) network(s) in your area. After the scanning process is complete, the tuner will display the names (also referred to as SSID’s) of one or more wireless networks that are within range. Scroll the large ‘Tune/ Select’ dial to the left or right until the name of your network (SSID) is highlighted by scrolling until the name of the desired router is highlighted. Once your router is highlighted, push the large Tuner/Select dial inwards to select your network.

NOTE: If your tuner does not display the name of your wireless network (SSID) please make sure that your router is transmitting in 802.11b/g mode. Additionally, please make sure you are within range of your wireless network.

Step 4: The display may now prompt you to enter in your network’s key. This ‘Key’ is the same key (password) you use to connect a wireless device (laptop, mobile phones, game console etc) to your Wi-Fi (wireless) network. This key or password is also sometimes called a ‘WEP’ or ‘WPA’ password or ‘code’. If you do not know your password, please contact the person or company that set up your network to obtain your password.

NOTE: All passwords are upper and lower case sensitive. Thus, letters MUST be entered correctly using upper and lower case as used to set the password originally. Numbers are not case sensitive. To enter in your password, scroll the ‘Tuner/Select’ dial to the right or left until

Page 6 Page 8
Image 7
Page 6 Page 8
Contents Tuner User’s Guide Table of Contents License Information and Warranty Please read before installation Important Safety Instructions and WarningsPage Advisory Quickstart Guide 1st time Wireless Set Up Page Tuner controls & connections ContentsPower Tuner remote control functions and controlsConnect Your Tuner to Your Network Getting Started Power up the tunerIiiiiiiiiiiiiiiiiii Scan for a wireless network connectionHint Connect to the wireless networkEND Bcdef Wired connection, settings & network configurations Wired network connection & tuner settingsOther options under ‘Settings’ include Main Menu Changing the volume headphone connectionSettings & Network Configurations Choosing a tuner station to listen toLocation SiriusGenre Choosing a Pandora tuner station Storing a tuner station in a presetRequesting a station that is currently unavailable Playing a preset tuner stationStations which allow you to choose what you listen to Setting the clock DST OFF Setting the alarmSet Alarm 1506 Setting the sleep timer Configuring ‘My Stuff’Configuring My Stations’ Configuring My ProfileConfiguring My Streams’ Configuring My Pandora’ Configuring ‘My Podcast’Accessing Pandora Feedback Menu Media Player Quickstart Guide Apple OSX Locate the shared audio files using the tuner Listening to a complete shared album Listening to a single shared trackArranging Queuing Up albums for playback later Arranging Queuing Up tracks for playback laterControlling playback Playing tracks in random order Removing tracks from the list queuePlaying tracks in the list queue repeatedly Page Page Locating and playing media files using the tuner and UPnP Removing track from the list queue Arranging queuing up UPnP tracks for playback laterPlaying tracks in the list queue repeatedly Network Config Choosing desired option from the Configure menuLanguage Upgrade FirmwareFactory Reset Register Clock SetupUPnP Wi-Fi StrengthOther Cool Stuff Troubleshooting License Information and Warranty SpecificationsWarranty does not cover Set Up Media Sharing In Windows Media Player Customer Service and SupportPage Page Play Music on the Internet Tuner Grace Digital Inc. San Diego, CA
Top Page Image Contents