Assembly and Installation

To fully enjoy your new range, it is important that you read this booklet thoroughly.

Note: Please check for any damage that may have occurred during shipping. In the unlikely event that you find any shipping damage, inform your dealer immediately!

The Model 7100 and 9100 Range consists of three main parts:

The Range Base

The Range Body, and

The Exhaust Hood or Cresting Assembly

Tools required for assembly:

Slot screw driver

7/16” (11 mm) wrench or crescent wrench 5/16" (8 mm) wrench or crescent wrench

(You must have a qualified gas technician install this appliance to be sure the installation codes and rules are observed.)

	1/8"- 1/4"
	Teflon Glider
Teflon	Figure 1a
Glider	Figure 1a

Painted section

Nickel plated section

Figure 1

Assembly of Range Base

1.Unpackage the base sections, legs and hardware package which are located in a carton fastened to the skid at rear of the range (it would be a good idea to check for any damage that may have occurred during shipping).

2.Screw the base levelling bolts (with teflon glider attached) into each of the four legs. The levelling bolts are located in the hardware package. When installing the levelling bolts, the teflon glider should extend beyond the bottom of the leg by approximately 1/8"-1/4". Adjusting levelling bolts in too far will cause the leg to drag on the floor potentially causing damage to flooring. (see figure 1a ) . Check that gliders and floor are free of any debris, this will ensure you do not scratch your floor.

3.Assemble base to legs using the nuts and bolts provided. For the 48" the shorter base sections are the sides and the longer sections are front and rear. (the black painted section goes to the rear, see fig. 1). For the 30" the base sections are all the same length, the black painted section goes to the rear, see fig. 1.

4.Hand tighten the nuts and bolts until the range base is completely assembled. Ensure that all base sections are installed with the lip up.

5.Adjust base sections to the most upper position and tighten up the nuts and bolts.

9100, 7100 specifications

Hearth and Home Technologies offers a variety of advanced heating solutions, including the 9100 and 7100 models, which exemplify the company's commitment to innovation, efficiency, and aesthetics. These gas fireplaces provide homeowners with an elegant and practical way to enhance their living spaces while enjoying the warmth and ambiance of a traditional fire.

The 9100 model is known for its large viewing area, presenting a stunning flame display that serves as the focal point of any room. With a contemporary design, it easily complements modern interiors while also fitting into traditional decor. The unit features multiple style options, including linear configurations, allowing for versatility in home design. One of its key features is the IntelliFire® ignition system, which combines reliability with energy efficiency. This system ensures that the gas fireplace ignites smoothly and can be operated via a remote control, making it user-friendly.

The 7100 model, while slightly smaller, does not compromise on performance or aesthetics. It also offers a large viewing window, delivering a captivating flame experience that can transform any space into a cozy retreat. The 7100 is designed with ease of installation in mind, making it suitable for both new builds and retrofitting into existing homes. Among its notable technologies is the advanced heat management system, which allows for optimal heat distribution without compromising the fireplace's beautiful design.

Both models are engineered with efficiency in mind, featuring high AFUE (Annual Fuel Utilization Efficiency) ratings. This means they convert a significant amount of the gas used into heat, ultimately saving homeowners on energy costs while providing consistent warmth. Additionally, these units are equipped with options for custom flame presentations, allowing users to adjust flame height and color for a personalized touch.

Safety is also a primary consideration in the design of the 9100 and 7100 fireplaces. Both are equipped with safety features such as an automatic shutoff system in case of ignitions issues, ensuring peace of mind for users. The fireplaces are certified for venting flexibility, permitting various installation configurations while ensuring safety and performance standards are met.

In summary, Hearth and Home Technologies' 9100 and 7100 models are exemplary choices for those seeking modern, efficient, and aesthetically pleasing heating solutions. With advanced ignition systems, high efficiency, and customizable features, these gas fireplaces are designed to provide lasting warmth and style to any home environment.