Zanussi ZCG 7690 manual Checking the Main Oven Controls, Automatic Operation

Page 50

10. CHECKING THE MAIN OVEN CONTROLS

TO SET THE TIME OF DAY (see Fig.5)

1.Turn on the electricity supply and ensure that the thermostat is in the off position.

1a. Before setting timer read important note below.

2.Rotate the left hand clock knob to 'Manual' and back to the 'Clock' position.

3.Set the time of day by rotating the right hand knob. Note that it is a 24 hour clock.

4.

Rotate the left hand clock knob back to the 'Manual'

Fig.5

 

position.

 

 

NOTE: When setting the time of day with the selector knob in the 'Clock' position only, this will activate the timer for seven seconds after selection. This means that when setting the time of day in this function the time can only be set by using the right hand knob within a seven second period.

After seven seconds have elapsed from when the correct time of day has been set, the timer ceases to be active and subsequent operation of the right hand knob will not change the clock.

11. CHECKING THE MAIN OVEN

1.Set the clock as described above, the clock is now ready for manual operation.

2.Turn the main oven thermostat to Mk.9 and check that there is sparking from the ignition system. This should continue until the oven burner is alight.

3.When the oven burner lights up the sparking should cease, there should be a low gas rate at first to the oven burner which is the flame supervision device (F.S.D.) by pass rate.

4.When the F.S.D. phial has heated up it opens the F.S.D. valve and the main gas stream flows to the burner.

5.After 1 minute check that the flame covers the full width of the burner and is stable.

6.Set the oven thermostat to Mk.2, close the oven door and check that after about 10 minutes the flame has reduced in size.

7.Turn off the thermostat and check that the oven flames go out.

12. AUTOMATIC OPERATION

Having set the clock up as described above, turn the left hand knob to the 'Cook' position and set the right hand knob to show a cooking time of two minutes (0.02).

Turn the left hand knob to the 'Stop' position; the time shown on the display is now the time of day with two minutes added on. Rotate the right hand knob to add two minutes to this time to give a two minute delay.

Turn the left hand knob to the 'Auto' position to complete the programming sequence, the clock now shows the time of day again with 'Auto' glowing continuously.

Turn the oven thermostat on and two minutes after setting, the oven burner should commence its lighting sequence.

Two minutes after the lighting sequence has started the timer should cut off the gas supply to the oven burner and the audible signal should sound. The signal is continuous it may be switched off at any time by rotating the left hand knob.

Return timer to manual by rotating the left hand knob to the 'Manual' position.

50

Image 50
Contents ZCG Keep children, babies and toddlers awa all times For your safetyIntroduction Contents Lighting the appliance HotplateSecond oven Grill/second ovenGrill Oven light Main ovenTo turn off any burner Grill Prior to using the grillGrill control has two heat settings Heat controlPreheating Cooking positionsGeneral Positioning food on the gridGrill pan and handle Grill pan is supplied with a removable handleHotplate Burner sizesUse pans with flat bases. They are more stable Take care to avoid burns and scalds when youAre reaching across the hotplate Than pans which are warpedHelpful hints Oven shelves OvensHeat zones Baking trays and dishes Roasting CondensationOven cooking chart Main oven Mins. per ½kg 1lb and 25 mins 30 40 mins Lamb Shelf on Medium Oven cooking chart Second ovenBase Medium Base Well DoneFruit pie shortcrust 25 35 mins 45 60 mins Baked custard 50 60 minsTo set the time of day Electronic timerTo use the Timer Turn the selector knob to Manual then turn to ClockClock. Turn Setting the controls for automatic useAutomatic control Either directionFood take Cooked by? Switch off showsHow long will To cook?Hints and tips for automatic cooking Please note There is no slow cook on the second oven Slow cookingFood preparation slow cooking Thaw thoroughly before cooking Do not cook casseroles over 2.7kg 6lbCover food with a tight fitting lid or tin foil Left over food should be cooled quickly and refrigeratedCare and cleaning For your safety Cleaning the handles and control knobsWhen replacing hotplate burner parts Cap to crownGrill and oven furniture Ovens Main oven cleaning cycle Top oven cleaning cycle Some staining will remainCleaning between the outer and inner door glass To remove the outer glassLocation Cleaning The Door GlassInstalling the appliance Make sure that a stability bracket is fittedHeight to hotplate 900mm 920mm Appliance dimensionsPositioning Width 598mm DepthMoving your appliance General information For your safetyConnecting to the electricity supply Replacing the oven light bulb What is wrong and why? CheckProbably a fault Service and spare parts 7 0 5 9 2 9 9 2Customer Care Department Installation Instructions Grill DimensionsConnections HotplateSecond Oven Important Safety RequirementsMain Oven GeneralLocation of Appliance Fitting the Stability Bracket Parts RequiredLevelling the Appliance Connecting to GAS Connection to the Electricity SupplyChecking the Hotplate Pressure TestingChecking the Grill Checking LID SHUT-OFF DeviceAutomatic Operation Checking the Main Oven ControlsChecking the Main Oven General Note Checking the Second OvenChecking the Main Oven Light Guarantee Conditions Standard guarantee conditionsT E S G 7 6 9 0 T E S Part Number311694500

ZCG 7690 specifications

The Zanussi ZCG 7690 is a versatile and efficient gas cooker designed to meet the culinary needs of modern households. Renowned for its reliability and functionality, this model combines various features that enhance cooking performance while ensuring user convenience.

One of the main features of the ZCG 7690 is its powerful gas hob. The cooker is equipped with four gas burners, providing ample space for simultaneous cooking. Each burner offers a range of heat settings, allowing users to achieve precise temperature control. The burner sizes cater to different cooking requirements, from rapid boiling to gentle simmering, making it an ideal choice for various recipes.

The design of the Zanussi ZCG 7690 is user-friendly, featuring easy-to-use rotary knobs that allow for straightforward adjustment of flame strength. Additionally, the gas burners come with an automatic ignition system, which ensures that lighting the burners is quick and hassle-free. Safety is a priority; hence, the cooker includes a flame failure device that cuts off the gas supply if the flame goes out, providing peace of mind during meal preparation.

In terms of the oven compartment, the ZCG 7690 boasts a spacious capacity that can accommodate multiple dishes at once. The oven features conventional cooking technology, ensuring even heat distribution for consistent cooking results. Users can take advantage of various cooking methods, including baking, roasting, and grilling. The oven is also equipped with a timer function, helping home chefs keep track of cooking times for different dishes.

Cleaning and maintenance of the Zanussi ZCG 7690 have been simplified with its easy-to-clean enamel oven interior and removable oven shelves. The hob surface is designed to be durable and easy to wipe, ensuring that spills and splatters do not become a hassle.

Overall, the Zanussi ZCG 7690 represents a perfect blend of functionality and style. With its robust construction, efficient gas cooking technology, and user-friendly features, it is a reliable choice for any kitchen. Whether you are preparing a quick family meal or hosting a dinner gathering, this cooker adapts to your culinary needs, making cooking enjoyable and effortless. The combination of safety features, ample cooking space, and efficient performance makes the ZCG 7690 a preferred option for both novice cooks and seasoned chefs alike.