Zanussi ZDI 122 user manual Electrical connection, Fitting under a counter, Levelling

Page 23

Electrical connection

CAUTION!

Safety standards require the appliance to be earthed.

Prior to using the appliance for the first time, ensure that the rated voltage and type of supply on the rating plate match that of the supply where the appliance is to be installed.

The fuse rating is also to be found on the rating plate.

Always plug the mains plug into a correctly in- stalled shockproof socket. Multi-way plugs, connectors and extension cables must not be used.

This could constitute a fire hazard through over- heating.

If necessary, have the domestic wiring system socket replaced. In case that the electrical ca- ble has to be replaced, contact your local Serv- ice Force centre.

The plug must be accessible after the appliance has been installed.

Never unplug the appliance by pulling on the cable. Always pull the plug.

The manufacturer accepts no liability for failure to observe the above safety precautions.

Fitting under a counter

IMPORTANT!

Carefully follow the instructions on the enclosed template for building in the dishwasher and fit- ting the furniture panel.

WARNING!

The dishwasher must be secured against tilting. Therefore make sure that the counter it is fixed under, is suitably secured to a fixed structure (adjacent kitchen units cabinets, wall).

This dishwasher is designed to be fitted under a kitchen counter or work surface.

No further openings for the venting of the dishwasher are required, but only to let the wa- ter fill and drain hose and power supply cable pass through.

The dishwasher incorporates adjustable feet to allow the adjustment of the height.

During all operations that involve accessibility to internal components the dishwasher has to be unplugged.

Be sure that once the appliance has been in- stalled, it is easily accessible for the service engineer in the event that a repair is required.

Levelling

Good levelling is essential for correct closure and sealing of the door.

When the appliance is correctly levelled, the door will not catch on either side of the cabinet. If the door does not close correctly, loosen or tighten the adjustable feet until the machine is perfectly level. (See enclosed template).

23

Page 22 Page 24
Image 23
Page 22 Page 24
Contents Dishwasher ZDI Contents Correct use Safety informationGeneral safety Child safetyControl panel InstallationStarting the washing programme Indicator lightsProgramme description Washing programmesDegree of soil Type of loadSet the water softener When using tablets that integrate rinse aid and detergentFirst use Water hardness Clarke Mmol/l Setting the water softener manually see tableSetting the water softener electronically see table Use only special salt suitable for dishwashers Filling with dishwasher saltFilling with rinse aid Loading cutlery and dishes Adjusting the dosage of rinse aidAre of limited suitability Lower basket Adjusting the height of the upper basketMaximum height of the dishes Upper basketDetergent tablets Use of detergentUnloading the dishwasher Cleaning the filters Care and cleaningEnvironmental concerns Something not working Fault code and malfunctionPossible cause and solution Fault code and malfunction Wash results are not satisfactory Technical dataHints for test institutes Full load 12 standard place settingsConsumption values Water connection InstallationDrain hose Inlet hoseLevelling Electrical connectionFitting under a counter 156991170-00-12122007

ZDI 122 specifications

The Zanussi ZDI 122 is a remarkable built-in dishwasher that combines innovation, efficiency, and sleek design to fulfill modern kitchen needs. With a capacity to accommodate up to 12 place settings, it caters to both small families and larger households, ensuring that your dishwashing chores are managed effectively.

One of the standout features of the ZDI 122 is its energy efficiency. Rated with an A+ energy class, this dishwasher is designed to minimize energy consumption while delivering exceptional cleaning results. This not only helps in reducing your utility bills but also contributes positively to environmental sustainability, making it an ideal choice for eco-conscious consumers.

The ZDI 122 employs advanced washing technologies that ensure optimal cleaning of all types of dishware. Its MultiZone feature allows users to customize the washing power according to their needs. For instance, if you have a smaller load, you can activate only the upper or lower basket, saving both water and energy. This flexibility is complemented by a variety of wash programs, including intensive, normal, and quick washes, so you can choose the perfect setting based on your specific requirements.

The height-adjustable top basket is another highlight, making it easier to accommodate larger pots and pans when needed. Inside, the special Flexi Cutlery Basket ensures that utensils are thoroughly cleaned without the risk of nesting, which can lead to less effective washing results.

Noise level is also a crucial factor in the design of the ZDI 122. Operating at a quiet 49 dB, it allows for seamless integration into your home life without the disturbance commonly associated with dishwashers.

Moreover, the Zanussi ZDI 122 features a delay start option, giving you the freedom to schedule washes during off-peak hours, further enhancing its energy efficiency. The LED indicators provide clear information about the wash cycle, making it user-friendly.

In summary, the Zanussi ZDI 122 is not only a practical addition to any kitchen but also represents cutting-edge technology in dishwashing. With its combination of efficiency, intelligent design, and ease of use, it is an appliance that simplifies your daily routine while ensuring that your dishes come out sparkling clean every time.
Top Page Image Contents