Zanussi ZDF3020 manual Cleaning results are not satisfactory

Page 14

Fault code and malfunction

•the digital display shows The dishwasher will not drain

•the digital display shows The anti-flood device operates

The programme does not start

Possible cause and solution

•There is a blockage in the sink spigot. Clean the sink spigot.

•The connection of the water drain hose is not correct. The hose can be kinked or squashed.

Make sure that the connection is correct.

•Close the water tap and contact your local Service Force Centre.

•The appliance door is not closed. Close the door.

•Mains plug is not connected in. Put in the mains.

•The fuse has blown out in the household fuse box. Replace the fuse.

•Delay start is set.

Cancel the delay start to start the programme immediately.

After the check, switch on the appliance. Set the knob on the same washing programme as before the malfunction. The programme continues from the point of interruption. If the malfunction shows again, contact your Service Force Centre.

If the display shows a fault code, not described in the chart, contact your Service Force Centre.

These data are necessary to help you quickly and cor- rectly:

•Model (Mod.)

•Product number (PNC)

•Serial number (S.N.)

For these data, refer to the rating plate.

Write the necessary data here:

Model description : ..........

Product number : ..........

Serial number : ..........

The cleaning results are not satisfactory

The dishes are not clean

• The selected washing programme is not applicable for the type of load and

 

 

 

soil.

 

 

• The baskets are loaded incorrectly so that water cannot reach all surfaces.

 

 

• Spray arms do not turn freely because of incorrect arrangement of the load.

 

 

•

The filters are dirty or not correctly installed.

 

 

•

The quantity of detergent is too little or missing.

Limescales particles on the dishes

• The salt container is empty.

 

 

• The water softener is adjusted on a wrong level.

 

 

• The salt container cap is not closed correctly.

The dishes are wet and dull

• No rinse aid has been used.

 

 

• The rinse aid dispenser is empty.

There are streaks, milky spots or

• Decrease the rinse aid dosage.

a bluish coating on glasses and

 

 

dishes

 

 

14

 

 

 

Page 13 Page 15
Image 14
Page 13 Page 15
Contents Dishwasher ZDF3020 Contents Safety informationIndicator lights Contact your local Service Force CentreOff position Wash phase Dry phase Multitab Salt Control panelSetting mode Start/cancel buttonDelay start button Programme knobWashing programmes Consumption valuesWater hardness setting Manually Setting the water softenerManual adjustment Use of the applianceAppliance must be switched off Electronic adjustmentSet switch to position 1 or Use of dishwasher saltLoading cutlery and dishes Adjusting the dosage of rinse aidUse of rinse aid Helpful hints and tipsMaximum height of the dishes Cup racks upTilt forward 20 cm 31 cmUse of detergent Multitab functionInterrupting a washing programme Cancelling a washing programmeSelect and start a washing programme Care and cleaning Fault code and malfunction External cleaningFrost precautions Possible cause and solutionCleaning results are not satisfactory Environment concerns Technical dataInstallation Fitting under a counterWater inlet hose Adjusting the level of the applianceWater connection Drain hoseElectrical connection Page Page 156985782-00-102009

ZDF3020 specifications

The Zanussi ZDF3020 is a remarkable dishwasher designed to bring efficiency and convenience to your dishwashing routine. Known for its functional design, this appliance offers a variety of features that make it an ideal choice for modern households.

One of the standout characteristics of the Zanussi ZDF3020 is its impressive capacity. The dishwasher has a 12-place setting capacity, accommodating a significant number of dishes, pots, and utensils in a single load. This feature is particularly beneficial for families or those who entertain frequently, as it reduces the need for multiple washing cycles.

In terms of performance, the ZDF3020 is equipped with advanced washing technologies. Pioneering a unique 'Zanussi Clean' system, it ensures thorough cleaning with every cycle. The dishwasher employs multiple wash programs tailored for different levels of soil, making it versatile enough to handle everything from lightly soiled glasses to heavily stained cookware. Among the available programs, the rapid wash option stands out as it can deliver clean dishes in as little as 30 minutes, ideal for busy schedules.

Energy efficiency is another hallmark of the Zanussi ZDF3020. It boasts an A+ energy rating, meaning it consumes less water and electricity without compromising on performance. This not only helps in reducing utility bills but also minimizes environmental impact, making it a responsible choice for eco-conscious consumers.

The appliance is designed with user-friendliness in mind. The intuitive control panel is straightforward and allows for easy selection of wash programs, while the delay start function provides flexibility in scheduling washes according to your needs. Additionally, the ZDF3020 is built with a noise level of only 49 dB, ensuring that it operates quietly in the background, perfect for open-plan living spaces.

Durability is key, with a robust construction that promises longevity. The stainless steel interior resists stains and odors, ensuring that your dishwasher maintains its appearance and functionality over time.

Finally, the Zanussi ZDF3020 includes practical features like adjustable top racks, allowing you to customize the interior space based on your dishwashing needs. Overall, the Zanussi ZDF3020 is a well-rounded, dependable dishwasher that combines efficiency, performance, and ease of use for every kitchen.
Top Page Image Contents