Zanussi ZDF3020 manual Use of the appliance, Setting the water softener, Manual adjustment

The pressure and temperature of the water, the var- iations of power supply and the quantity of dishes

can change these values.

Use of the appliance

Refer to the following instructions for each step of pro- cedure:

1.Make a check if the water softener level is correct for the water hardness in your area. If necessary set the water softener.

2.Fill the salt container with dishwasher salt.

3.Fill the rinse aid dispenser with rinse aid.

4.Load cutlery and dishes into the dishwasher.

5.Set the correct washing programme for the type of load and soil.

6.Fill the detergent dispenser with the correct quantity of detergent.

7.Start the washing programme.

If you use combi detergent tablets ('3 in 1', '4 in 1', '5 in 1', etc.), refer to the chapter 'Multitab function'.

Setting the water softener

The water softener removes minerals and salts from the water supply. Minerals and salts can have bad effect on the operation of the appliance.

Water hardness is measured in equivalent scales:

•German degrees (dH°).

•French degrees (°TH).

•mmol/l (millimol per litre - international unit for the hardness of water).

•Clarke.

Adjust the water softener to the water hardness in your area. If necessary, contact your local water authority.

Water hardness

°dH	°TH	mmol/l	Clarke
51 - 70	91 - 125	9,1 - 12,5	64 - 88
43 - 50	76 - 90	7,6 - 9,0	53 - 63
37 - 42	65 - 75	6,5 - 7,5	46 - 52
29 - 36	51 - 64	5,1 - 6,4	36 - 45
23 - 28	40 - 50	4,0 - 5,0	28 - 35
19 - 22	33 - 39	3,3 - 3,9	23 - 27
15 - 18	26 - 32	2,6 - 3,2	18 - 22
11 - 14	19 - 25	1,9 - 2,5	13 - 17
4 - 10	7 - 18	0,7 - 1,8	5 - 12
< 4	< 7	< 0,7	< 5

1) No use of salt required.

You must set the water softener manually and elec- tronically.

Manual adjustment

The appliance is set at the factory at position 2.

Water hardness setting

manually	electronically
2	10
2	9
2	8
2	7
2	6
2	5
1	4
1	3
1	2
11)	11)

6