●If you are using dishwasher detergent that already contains rinse aid, it is necessary to deactivate the inflow of rinse aid, in order to avoid a double dosage.
To deactivate the inflow of rinse aid, proceed as follows:
(The dishwasher must be switched off)
When the inflow of rinse aid has been deactivated, the rinse aid indicator light on the control panel is automatically deactivated.
1.Press the On/Off push button. The On/off indicator light illuminates.
If other indicator lights are on, this means that a wash programme has been selected. The programme must be cancelled: press simultaneously the function push buttons
2 and 3 for about 2 seconds. All the indicator lights will turn off (except for the On/Off indicator light).
2.Press simultaneously function push buttons 2 and 3, until the indicator lights of the function push buttons 1, 2 and 3 start flashing.
3.Press the function push button 2, the indicator lights of function push buttons 1 and 3 turn off while the indicator light of the function push button 2 goes on flashing, at the same time the indicator light END illuminates indicating that the inflow of rinse aid is active.
4.To deactivate the inflow of rinse aid, press the function push button 2 again, the indicator light END turns off, indicating that the inflow of rinse aid has been deactivated.
5.To memorise the operation, switch off the dishwasher by pressing the On/Off push button or wait about 60 seconds after which the dishwasher will automatically return to setting mode.
To activate the inflow of rinse aid follow the above instructions until the indicator light END illuminates.
7