Zanussi DA 6141 D manual To fill, Rinse aid, Filling with rinse aid, Adjusting the dose

Page 16

Only use salt specifically designed for use in dishwashers.

All other types of salt not specifically designed for use in a dishwasher, especially table salt, will damage the water softener.

Only fill with salt just before starting one of the washing programmes (except the Rinse and Hold programme). This will prevent any grains of salt or salty water, which may have been spilt, remaining on the bottom of the machine for any period of time, which may cause corrosion.

To fill:

1.Open the door, remove the lower basket and unscrew the cap of the salt container by turning it anticlockwise.

2.Pour 1 litre of water inside the container (this is necessary only before filling with salt for the first time).

Rinse aid

Rinse aid is automatically added during the last rinse, ensuring thorough rinsing, and spot and streak free drying. The dispenser, which is positioned inside the door, holds about

110 ml of rinse aid, which is sufficient for 16 - 40 dishwashing programmes, depending upon the dosage setting.

Rinse aid can be added in one of two ways:

● If you are using dishwasher detergent that already contains

rinse aid, the detergent including the rinse aid is placed in

the detergent compartment.

- In this case the rinse aid compartment must be empty.

If in the rinse aid dispenser there is still rinse aid you

must wait until it has finished before using detergent that

contains rinse aid.

● If you are using dishwasher detergent and rinse aid

separately, the rinse aid is to be put into the rinse aid

3.Using the funnel provided, pour in the salt until the container is full.

4.Replace the cap making sure that there is no trace of salt on the screw thread or on the gasket.

5.Screw on the cap tightly turning it clockwise until it stops with a click.

SALE

ZOUTT

SAL

SALZ

SEL

SR14

dispenser.

- In this case the rinse aid dosage must be set in position

from 1 to 6 (see "Adjusting the dose").

Filling with rinse aid

(Rinse aid dispenser type A)

1.

Open the container by pressing the release button (A).

2.

Fill with rinse aid exactly up to the level indicator marked

 

"max".

The salt container will require topping up periodically.

According to the model of dishwasher, you are reminded of this by:

A)The salt cap has a refill indicator window in the centre.

A green float is clearly visible when there is salt inside the container and almost disappears when the salt has finished reminding you to add salt.

BR07

BR14

B)A salt indicator light on the control panel will come on when the salt has finished.

The salt indicator light on the control panel can remain illuminated for 2-6 hours after the salt has been replenished, assuming the dishwasher remains switched on. If you are using salts that take longer to dissolve then this can take longer. The function of the machine is not affected.

Do not worry if water over flows from the unit when filling with salt, this is quite normal.

Ensure that the lid is closed after every refill.

Adjusting the dose

According to the finish and drying results obtained, adjust the dose of rinse aid by means of the 6 position selector (position 1 minimum dosage, position 6 maximum dosage).

Increase the dose if there are drops of water or lime spots on the dishes after washing.

The dose is factory set in position 4.

Reduce it if there are sticky whitish streaks on the dishes.

BR09

4

Page 15 Page 17
Image 16
Page 15 Page 17
Contents Dishwasher Description of the appliance Control panelDaily use Loading cutlery and dishesLower basket Are of limited suitabilityAdjusting the height of the upper basket Cutlery basketUpper basket To move to the higher position proceed as followsDegree of soil Washing programmesSelector dial Starting a washing programme Interrupting a washing programmeEnd of the washing programme Unloading the dishwasherTechnical specifications Fitting under a counterLevelling Proceed as followsGuarantee Conditions Service and Spare PartsCustomer Care Department Hints for test centres Page Page From the Electrolux Group. The world’s No.1 choice Dishwasher Contents Safety instructionsPrior to using for the first time Setting the water softenerDisposal Water softenerAdjusting the dose To fillRinse aid Filling with rinse aidTop up with rinse aid when Rinse aid dispenser type BUse of detergent Fill with detergentDetergent tablets Concentrated detergentMaintenance and cleaning Cleaning the filtersFrost precautions Prolonged periods of non-operationThere are problems when operating the dishwasher Malfunction Possible cause SolutionsFor dishwasher models with delay start What to do, whenDishes are not clean Wash results are not satisfactoryDishes are wet and dull Water drops have dried onto glasses and dishesWater supply connections Installation instructionsWater outlet hose connection Electrical connection Green and Yellow Earth Blue- Neutral Brown- Live01/03

DA 6141 D specifications

The Zanussi DA 6141 D is an innovative and efficient kitchen appliance designed to enhance your cooking experience while seamlessly blending into modern interiors. As a powerful kitchen hood, it excels in its primary function of maintaining a clean and fresh environment by effectively eliminating smoke, steam, and odors produced during cooking.

One of the standout features of the Zanussi DA 6141 D is its impressive extraction rate. With a maximum extraction capacity of up to 600 m³/h, it ensures that even the strongest cooking odors and vapors are quickly removed from the kitchen. This makes it perfect for households that frequently prepare strong-smelling dishes or simply want to keep their kitchen air fresh and inviting.

The Zanussi DA 6141 D is equipped with a highly efficient LED lighting system. This not only provides excellent illumination over your cooking area, making food preparation easier but also contributes to energy savings. LEDs are known for their longevity and lower energy consumption compared to traditional bulbs, making this hood a more environmentally-friendly choice.

In terms of design, the Zanussi DA 6141 D features a sleek stainless steel finish that complements a variety of kitchen styles. The minimalist design ensures that it does not dominate the cooking space while simultaneously adding a touch of elegance. The unit is designed to be wall-mounted, allowing for flexible installation options, making it a practical choice for various kitchen arrangements.

The installation is further simplified by the inclusion of a user-friendly control panel. It offers multiple fan speed settings, allowing the user to adjust the airflow according to their cooking needs. This customization ensures optimal performance whether you’re simmering, frying, or grilling.

Another significant aspect of the Zanussi DA 6141 D is its ease of maintenance. The removable and washable grease filters are designed to trap grease and other residues, ensuring the longevity of the appliance. Regular cleaning of these filters will keep the extractor running efficiently and can also improve indoor air quality.

Furthermore, the noise levels of the Zanussi DA 6141 D are remarkably low, especially when operated on lower speed settings. This feature allows for a more enjoyable cooking environment, free from the disruption of excessive fan noise.

In summary, the Zanussi DA 6141 D stands out in the kitchen hood market with its combination of powerful extraction capabilities, energy-efficient LED lighting, modern design, user-friendly controls, and ease of maintenance. It not only contributes to a cleaner kitchen environment but also elevates the overall cooking experience with its thoughtful features and characteristics.
Top Page Image Contents