Installation instructions

Any electrical and/or plumbing work required to install this appliance should be carried out by a qualified electrician and/or plumber or competent person.

Remove all packaging before positioning the machine.

If possible, position the machine next to a water tap and a drain.

Water supply connections

This dishwasher may be fed with either hot (max. 60°) or cold water (See "Technical specifications" - Instruction book part 2). Nevertheless we advise you a cold water supply.

A hot water supply is not always efficient with very soiled crockery as it shortens the washing programmes a lot.

The dishwasher must not be connected to open hot water appliances or instantaneous water heaters.

The water pressure must be within the limits given in the technical specifications. Your local Water Authority will advise you on the average mains pressure in your area.

The water inlet hose must not be kinked, crushed, or entangled when it is being connected up.

The dishwasher features fill and drain hoses which can be turned either to the left or the right to suit the installation.

The dishwasher is fitted with safety devices that prevent the wash water returning into the drinking water system and comply with the applicable plumbing regulations.

Do not use, for connection, old hoses which have been used in another appliance.

If the machine is connected to new pipes or pipes which have not been used for a long time, you should run the water for a few minutes before connecting the inlet hose.

Water outlet hose connection

The end of the drain hose can be connected in the following ways:

1.To the sink outlet spigot, securing it to the underside of the work surface. This will prevent waste water from the sink running into the machine.

2.Hooked over the edge of the sink using the special curved plastic guide provided (if provided with the machine).

3.To a stand pipe provided with vent-hole, minimum internal diameter 4 cm.

The waste connection must be at a height of between 30 cm (minimum) and 100 cm (maximum) from the bottom of the dishwasher.

The drain hose can face either to the right or left of the dishwasher

Ensure the hose is not bent or squashed as this could prevent or slow down the discharge of water.

The sink plug must not be in place when the machine is draining as this could cause the water to siphon back into the machine.

If you use a drain hose extension it must be no longer than 2 metres and its internal diameter must be no smaller than the diameter of the hose provided.

Likewise the internal diameter of the couplings used for connections to the waste outlet must be no smaller than the diameter of the hose provided.

CS18

Attention!

Our appliances are supplied with a security device to protect against the return of dirty water back into the machine.

If the spigot of your sink has a "no return valve" incorporated this can prevent the correct draining of your dishwasher. We advise you therefore to remove it.

DA 6141 D specifications

The Zanussi DA 6141 D is an innovative and efficient kitchen appliance designed to enhance your cooking experience while seamlessly blending into modern interiors. As a powerful kitchen hood, it excels in its primary function of maintaining a clean and fresh environment by effectively eliminating smoke, steam, and odors produced during cooking.

One of the standout features of the Zanussi DA 6141 D is its impressive extraction rate. With a maximum extraction capacity of up to 600 m³/h, it ensures that even the strongest cooking odors and vapors are quickly removed from the kitchen. This makes it perfect for households that frequently prepare strong-smelling dishes or simply want to keep their kitchen air fresh and inviting.

The Zanussi DA 6141 D is equipped with a highly efficient LED lighting system. This not only provides excellent illumination over your cooking area, making food preparation easier but also contributes to energy savings. LEDs are known for their longevity and lower energy consumption compared to traditional bulbs, making this hood a more environmentally-friendly choice.

In terms of design, the Zanussi DA 6141 D features a sleek stainless steel finish that complements a variety of kitchen styles. The minimalist design ensures that it does not dominate the cooking space while simultaneously adding a touch of elegance. The unit is designed to be wall-mounted, allowing for flexible installation options, making it a practical choice for various kitchen arrangements.

The installation is further simplified by the inclusion of a user-friendly control panel. It offers multiple fan speed settings, allowing the user to adjust the airflow according to their cooking needs. This customization ensures optimal performance whether you’re simmering, frying, or grilling.

Another significant aspect of the Zanussi DA 6141 D is its ease of maintenance. The removable and washable grease filters are designed to trap grease and other residues, ensuring the longevity of the appliance. Regular cleaning of these filters will keep the extractor running efficiently and can also improve indoor air quality.

Furthermore, the noise levels of the Zanussi DA 6141 D are remarkably low, especially when operated on lower speed settings. This feature allows for a more enjoyable cooking environment, free from the disruption of excessive fan noise.

In summary, the Zanussi DA 6141 D stands out in the kitchen hood market with its combination of powerful extraction capabilities, energy-efficient LED lighting, modern design, user-friendly controls, and ease of maintenance. It not only contributes to a cleaner kitchen environment but also elevates the overall cooking experience with its thoughtful features and characteristics.