Washing programmes
Programme | Degree of soil | Starting | Cycle description | (2) Consumption values | ||||||
| and | position of the |
|
|
|
|
|
|
| |
|
| Programme duration | Energy |
| Water | |||||
| type of load | programme |
| (in minutes) | consumption |
| consumption | |||
|
| selector dial |
|
|
| (in kWh) |
| (in litres) | ||
|
|
|
|
|
|
|
|
|
| |
(1) INTENSIVE | Heavy soil |
| Cold prewash |
|
|
|
|
|
| |
| Main wash up to 65°C |
|
|
|
|
|
| |||
65°C | Crockery, cutlery, |
| 1 cold rinse | 76 |
| 1,1 |
|
| 17 | |
A | ||||||||||
| pots and pans | 1 hot rinse |
|
|
|
|
|
| ||
|
|
|
|
|
|
|
| |||
|
|
|
|
|
|
|
| |||
|
|
| Drying |
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
| |
NORMAL | Normal soil |
| Main wash up to 65°C |
|
|
|
|
|
| |
65°C | Crockery and |
| 1 cold rinse |
|
|
|
|
|
| |
B | 70 |
| 1,1 |
| 14 | |||||
1 hot rinse |
|
| ||||||||
| cutlery |
|
|
|
|
|
|
| ||
|
|
|
|
|
|
|
| |||
|
| Drying |
|
|
|
|
|
| ||
|
|
|
|
|
|
|
|
| ||
|
|
|
|
|
|
|
|
|
| |
RINSE & HOLD | Any. |
| 1 cold rinse (to avoid |
|
|
|
|
|
| |
Partial load (to |
|
|
|
|
|
|
| |||
| food scraps from | 10 |
| 0,1 |
|
| 11 | |||
C |
|
|
| |||||||
| be completed |
|
|
| ||||||
|
| sticking together). |
|
|
|
|
|
| ||
|
|
|
|
|
|
|
| |||
| later in the day). |
|
|
|
|
|
|
| ||
|
|
|
|
|
|
|
|
| ||
|
|
|
|
|
|
|
|
|
|
(1)Testing programme for EN 50242 (see "Hints for Test Centres").
(2)The consumption values are intended as a guide and depends on the pressure and the temperature of the water and also by the variations of the power supply.
Operating sequence
1.Check that the baskets have been loaded correctly and that the spray arms can rotate freely
2.Turn on the water tap
3.Close the dishwasher door
4.Set and start of the programme
Turn the programme selector dial clockwise until the letter of the programme you wish to select corresponds with the programme marker on the control panel. Depress the On/Off push button.
The On/Off indicator light will come on and the machine will start.
5.Interrupting a washing programme in progress
Interrupt a washing programme in progress ONLY if it’s absolutely necessary.
Attention! Hot steam may escape when the door is opened. Open the door carefully.
6. End of the washing programme
The dishwasher will automatically stop.
The On/Off indicator light remains on until the On/Off push button is depressed.
Only the On/Off integrated indicator light will remain on. Switch off the dishwasher by pressing the On/Off push button.
Open the door and wait a few minutes before removing the dishes; in this way they will be cooler and the drying will be improved.
Water may appear on the sides and door of the dishwasher as the stainless steel will eventually become cooler than the dishes.
Unloading the dishwasher
Hot dishes are sensitive to knocks. The dishes should therefore be allowed to cool down before removing from the appliance.
Empty the lower basket first and then the upper one; this will avoid water dripping from the upper basket onto the dishes in the lower one.
When the washing programme has finished, it is recommended that the dishwasher is unplugged and the water tap turned off.
To interrupt a washing programme
a)Open the dishwasher door; the programme will stop. Close the door; the programme will start from the point in which it was interrupted.
b)Press the On/Off push button (in this case the On/Off indicator light turns off). Press the On/Off push button again; the programme will start from the point in which it was interrupted.
4