Zanussi DE 6854 Filling with salt, To fill, Rinse aid, Filling with rinse aid, Adjusting the dose

Page 6

Filling with salt

Special salt can be added in one of two ways:

If you are using dishwasher detergent that already contains salt, the detergent including the salt is placed in the detergent compartment.

-In this case the water softener must manually be set to 1 and electronically to 1 to ensure that the special salt is taken from the detergent container only.

If you are using dishwasher detergent and salt separately, the special salt is to be put into the salt container.

-In this case the water softener must manually be set to 1 or 2 and electronically between 1 and 5 (depending on the water hardness in your area) to ensure that the special salt is taken from the salt container only.

Only use salt specifically designed for use in dishwashers.

All other types of salt not specifically designed for use in a dishwasher, especially table salt, will damage the water softener.

Only fill with salt just before starting one of the washing programmes.

This will prevent any grains of salt or salty water, which may have been spilt, remaining on the bottom of the machine for any period of time, which may cause corrosion.

To fill:

1.Open the door, remove the lower basket and unscrew the cap of the salt container by turning it anticlockwise.

2. Pour 1 litre of water inside the container (

this is necessary

only before filling with salt for the first time

).

Rinse aid

Rinse aid is automatically added during the last rinse, ensuring thorough rinsing, and spot and streak free drying. The dispenser, which is positioned inside the door, holds about 110 ml of rinse aid, which is sufficient for 16 - 40 dishwashing programmes, depending upon the dosage setting.

Rinse aid can be added in one of two ways:

If you are using dishwasher detergent that already contains rinse aid, the detergent including the rinse aid is placed in the detergent compartment.

-In this case the rinse aid compartment must be empty and the rinse aid indicator light deactivated.

If in the rinse aid dispenser there is still rinse aid you must wait until it has finished before using detergent that contains rinse aid.

If you are using dishwasher detergent and rinse aid separately, the rinse aid is to be put into the rinse aid dispenser.

-In this case the rinse aid dosage must be set in position

from 1 to 6 (see "Adjusting the dose") and the rinse aid indicator light activated.

Filling with rinse aid

(Rinse aid dispenser type A)

1.Open the container by pressing the release button (A).

2.Fill with rinse aid exactly up to the level marked "MAX".

3.Using the funnel provided, pour in the salt until the container is full.

4.Replace the cap making sure that there is no trace of salt on the screw thread or on the gasket.

5.Screw on the cap tightly turning it clockwise until it stops with a click.

SALET

SAL

SALZ

SEL

SR14

Ensure that the lid is closed after every refill.

Adjusting the dose

The salt container will require topping up periodically. You are reminded of this by the salt indicator light on the control panel which comes on when the salt has finished.

Do not worry if water over flows from the unit when filling with salt, this is quite normal.

According to the finish and drying results obtained, adjust the dose of rinse aid by means of the 6 position selector (position 1 minimum dosage, position 6 maximum dosage).

Increase the dose if there are drops of water or lime spots on the dishes after washing.

The salt indicator light on the control panel can remain illuminated for 2-6 hours after the salt has been replenished, assuming the dishwasher remains switched

on. If you are using salts that take longer to dissolve then this can take longer. The function of the machine is not affected.

The dose is factory set in position 4.

Reduce it if there are sticky whitish streaks on the dishes.

BR09

6

Image 6
Contents Dishwasher Contents Child safety Safety instructionsInstallation DisposalDescription of the appliance Indicator lightsPhase indicator lights Control panelSetting electronically Setting the water softenerSetting manually To fill Adjusting the doseFilling with salt Rinse aidPress push button Again, Rinse aid Turns off. At the same time Rinse aidStarts to flash DeactivatedLower basket Daily useLoading cutlery and dishes Cutlery basket31 cm Adjusting the height of the upper basketUpper basket To move to the higher position proceed as followsUse of 3 in 1 combi detergent tablets Use of detergentFill with detergent Concentrated detergentWashing programmes End of the washing programme Setting and starting the programmeSetting/cancelling the Delay start Unloading the dishwasherFrost precautions Maintenance and cleaningCleaning the filters Prolonged periods of non-operationFault code / malfunction Possible cause Flashing fault code appearsThere are problems when operating the dishwasher Fault Possible cause SolutionsDishes are wet and dull Service and Spare PartsCustomer Care Department Water drops have dried onto glasses and dishesEuropean Guarantee Guarantee ConditionsStandard guarantee conditions ExclusionsLevelling Installation instructionsFitting under a counter Water supply connectionsThis appliance must be earthed SymbolElectrical connection Blue- Neutral Brown- LiveProgrammes chart Hints for test centresType From the Electrolux Group. The world’s No.1 choice

DE 6854 specifications

The Zanussi DE 6854 is a premium dishwasher that combines efficiency, performance, and design to enhance your kitchen experience. With a sleek exterior and intuitive controls, this model is suited for modern households that demand both functionality and aesthetics in their home appliances.

One of the standout features of the Zanussi DE 6854 is its impressive capacity. Designed to accommodate up to 15 place settings, it is ideal for families and those who frequently entertain guests. The adjustable upper rack allows for flexibility when loading larger pots and pans, ensuring that every item gets thoroughly cleaned.

The DE 6854 is equipped with several wash programs to suit different cleaning needs. From intensive cleaning cycles for heavily soiled dishes to quick wash options for lightly soiled items, users can select the perfect setting for any load. The Eco program is particularly noteworthy for those looking to reduce water and energy consumption without sacrificing performance.

Zanussi has integrated advanced technologies in the DE 6854 to optimize cleaning efficiency. The innovative AirDry technology ensures that dishes come out not just clean, but also dry without the need for extra hand drying. This feature functions by automatically opening the door at the end of the cycle, allowing fresh air to circulate and effectively drying the contents.

Noise levels are often a concern for dishwashers, and the DE 6854 addresses this with a low noise operation, making it an ideal choice for open-plan living spaces. With an operational decibel rating that is well within the quiet range, this model allows users to run it at any time of day without disturbing the household.

Additional highlights of the Zanussi DE 6854 include a delay start function, which allows users to set the dishwasher to run at a more convenient time. This feature is particularly beneficial for those who want to take advantage of off-peak energy rates.

With its sleek design, smart functionalities, and efficient cleaning capabilities, the Zanussi DE 6854 offers a comprehensive solution for all dishwashing needs. It not only makes chores easier but also enhances the overall kitchen experience. Whether for daily use or special occasions, this dishwasher stands out as a reliable and stylish choice for modern homes.