Zanussi ZD 699 ALU manual Hints for test centres, Technical specifications

Page 25

Hints for test centres

Before starting any test it is necessary to fill completely with salt the salt container and with rinse aid the rinse aid dispenser.

Test standard

EN 50242

 

 

Reference programme:

Bio 50°C with prewash

 

 

Load:

12 standard place settings

 

 

Rinse aid selector:

position 5

 

 

Detergent dosage :

30 g in the dispenser

 

 

US66

Arrangement

upper basket

UI48

Arrangement

lower basket

UI69

Arrangement cutlery basket

US67

Arrangement knife basket

Technical specifications

DIMENSIONS

Width

59.6 cm

 

Height with worktop

81.8 - 87.8 cm

 

Max depth

57.5 cm

 

Max depth with open door

111.4 cm

 

 

 

ELECTRICAL CONNECTION

Voltage

220/240 V - 50 Hz

MOTOR RATING DURING WASH

 

200 W

POWER OF HEATING ELEMENT

 

2100 W

OVERALL POWER

 

2300 W

 

 

 

WATER SUPPLY PRESSURE

Minimum

50 kPa (0.5 bar)

 

Maximum

800 kPa (8 bar)

 

 

 

CAPACITY

 

12 place settings

 

 

 

25

IST41en

Page 24 Page 26
Image 25
Page 24 Page 26
Contents
Dishwasher Contents Installation Important safety informationChild Safety During UseOpen door Control panelSalt Water tapCycle will be carried out Aid is automatically excludedShort instruction accepted signal Audible signalsLong programme run signal Intermittent end of programme signalBefore use Setting the water softenerPress Use salt from level 1 upwardsTo fill Filling with saltTo fill with salt, unscrew the cap of the salt container Rinse aid Adjusting the doseEnsure that the lid is closed after every refill Start from positionLoading your appliance Using your applianceLower basket Open the door and slide out the baskets to load the dishesRemovable knife basket Cutlery basketFor best results use the cutlery grid/s inserts provided When the top basket is in the higher Adjusting the height of the upper basketUpper basket To move to the higher position proceed as followsIf using detergent in tablets proceed as follows If using powder detergents proceed as followsUse of detergent Compact detergents with enzymesTo save energy Hints and tipsFor best washing results Items not suitable for dishwashersWashing programmes Operating sequence Current programme Delay start will not modify the settings made previouslyIt is now possible to select a new washing programme At the end of the washing programmeCleaning the central filter Internal cleaningCleaning the large filter Frost precautions External cleaningMoving the machine Actions listed below Something not working Protection against flooding Service and spare parts Customer Care Department Customer Care Department ZanussiStandard guarantee conditions Guarantee conditionsEuropean Guarantee ExclusionsTo contact your local Zanussi Service Centre telephone Zanussi Service ForceMidlands Hints for test centres Technical specificationsWater supply connections Installation instructionsNevertheless we advise a cold water supply Locknut must be correctly fitted to avoid water leaksWater outlet hose connection Electrical connection To fit the pads, press them onto the feet Building-inMounting the infill panel Furniture door plinthFixing to the adjacent units Width 596 mm HeightFitting the vapour protection Kitchen plinth adjustmentNoise protection Electrolux Household Appliances Limited From the Electrolux Group. The world’s No.1 choice
Top Page Image Contents