Zanussi ZSF 4111 Starting a washing programme, Press the On/Off button, Unloading the dishwasher

Page 13

Starting a washing programme

1.Check that the baskets have been loaded correctly and that the spray arms can rotate freely

2.Turn on the water tap

3.Close the dishwasher door

7. End of the washing programme

The dishwasher will automatically stop and the End of cycle phase indicator light will illuminate.

The indicator light of the programme just ended will remain on.

Switch off the dishwasher by pressing the On/Off button, the On/Off indicator light turns off.

Open the door and wait a few minutes before removing the dishes; in this way they will be cooler and the drying will be improved.

4. Press the On/Off button

The On/Off indicator light will come on (setting mode).

5. Setting and starting the programme

Press the button corresponding to the required programme (see "Washing programmes" chart).

The indicator light corresponding to the programme and the phase indicator lights foreseen for that programme will start blinking.

After about 3 seconds from the last pressure of a button the programme starts automatically.

Once the programme has started the phase indicator lights will turn off except for the phase under way.

Note: it is possible to select a washing programme also with the door slightly opened.

In this case the start of the programme will occur after the closure of the door. Until this moment it is possible to modify the setting made.

a)Press On/Off button.

b)Select a washing programme.

c)Close the door.

The programme or the countdown will start automatically after about 3 seconds from the closure of the door.

6. To interrupt or cancel a washing programme in progress

Interrupt or cancel a washing programme in progress ONLY if it’s absolutely necessary.

Attention! Hot steam may escape when the door is opened. Open the door carefully.

To interrupt a washing programme in progress

a)Open the dishwasher door; the programme will stop. Close the door; the programme will start from the point in which it was interrupted.

b)Press the On/Off button (in this case all the indicator lights turn off). Press the On/Off button again;

the programme will start from the point in which it was interrupted.

To cancel a washing programme in progress

To cancel a washing programme in progress, press simultaneously the function buttons 2 and 3 until all the indicator lights will turn off (except for the On/Off indicator light and eventually the rinse aid and salt indicator lights) indicating that the running programme has been cancelled.

(If a new washing programme will be selected, check that there is detergent in the detergent dispenser).

8. Unloading the dishwasher

Hot dishes are sensitive to knocks. The dishes should therefore be allowed to cool down before removing from the appliance.

Empty the lower basket first and then the upper one; this will avoid water dripping from the upper basket onto the dishes in the lower one.

Water may appear on the sides and the door of the dishwasher as the stainless steel will eventually become cooler than the dishes.

When the washing programme has finished, it is recommended that the dishwasher is unplugged and the water tap turned off.

13

Page 12 Page 14
Image 13
Page 12 Page 14
Contents Dishwasher Contents Installation Safety instructionsChild safety DisposalControl panel Description of the appliancePage Indicator light Prior to using for the first timeWater softener ExamplesTo fill Filling with dishwasher saltRinse aid Adjusting the doseFilling with rinse aid Deactivation/activation of the dosage of rinse aidLoading cutlery and dishes Daily useLower basket Cutlery basketUpper basket Adjusting the height of the upper basketUse of detergent To move to the higher position proceed as followsDetergent tablets Different kinds of detergentConcentrated detergent Combi detergentsWashing programmes To interrupt or cancel a washing programme in progress Setting and starting the programmeStarting a washing programme Press the On/Off buttonCleaning the filters Maintenance and cleaningFrost precautions Prolonged periods of non-operationThere are problems when operating the dishwasher Flashing fault code appearsFault code / malfunction Possible cause Solutions Fault Possible cause SolutionsWash results are not satisfactory Dishes are not cleanDishes are wet and dull Water drops have dried onto glasses and dishesCustomer Care Department Service and Spare PartsStandard Guarantee Conditions Guarantee ConditionsEuropean Guarantee ExclusionsFitting under a counter Installation instructionsLevelling Water supply connectionsElectrical connection Water outlet hose connectionGreen and Yellow Earth Blue- Neutral Brown- Live Cup racks position a Hints for test centresPage Page From the Electrolux Group. The world’s No.1 choice

ZSF 4111 specifications

The Zanussi ZSF 4111 is a highly efficient and compact dishwasher designed for households seeking a blend of performance and convenience. With its sleek design and modern features, this appliance serves to simplify daily dishwashing tasks while ensuring optimal cleanliness and efficiency.

One of the standout features of the ZSF 4111 is its impressive energy efficiency rating. This model boasts an A++ rating, meaning it consumes less electricity compared to standard dishwashers. This not only helps the environment by reducing energy consumption, but it also saves you money on utility bills over time.

The ZSF 4111 is equipped with various washing programs, offering users flexibility depending on their needs. These include a quick wash cycle that gets dishes clean in under 30 minutes, ideal for those times when you need clean plates in a hurry. The eco-friendly washing option ensures that you’re not only saving on energy but also on water, making it a environmentally responsible choice for eco-conscious consumers.

This model can accommodate up to 10 place settings, making it perfect for smaller families or individuals. The adjustable racks allow for the optimal arrangement of dishes, pots, and utensils, maximizing space efficiency and ensuring thorough cleaning even for larger items. Additionally, the upper basket can be adjusted to create more room for taller items below, enhancing its adaptability to various loads.

Another innovative feature of the Zanussi ZSF 4111 is its noise level of just 49 decibels, making it one of the quieter models available. This means it can operate quietly in the background without disrupting your daily activities or evening relaxation.

Furthermore, the dishwasher incorporates a delay start feature, granting users the flexibility to schedule washing cycles during off-peak hours or when it’s most convenient. This ensures that the user can run the dishwasher overnight or during the day while they are out, without worrying about noise or power usage during peak times.

Overall, the Zanussi ZSF 4111 combines practicality with advanced technology, providing an excellent solution for efficient dishwashing. Its energy-saving capability, versatile wash programs, space-efficient design, and quiet operation make it a valuable addition to any kitchen, catering to the busy lifestyles of modern households. With the ZSF 4111, you can enjoy clean dishes with minimal effort, all while being kind to the planet and your wallet.
Top Page Image Contents