Zanussi ZSF 6066 manual Starting a washing programme, End of the washing programme

Page 13

Starting a washing programme

1.Check that the baskets have been loaded correctly and that the spray arms can rotate freely

2.Turn on the water tap

3.Close the dishwasher door

4.Setting and starting the programme

Turn the programme selector dial until the marker on the dial corresponds with the desired programme (see "Washing programmes" chart).

The On-Off indicator light illuminates.

The indicator lights of the phases foreseen for the programme start flashing.

Press the Start/Cancel button, the programme starts automatically and the Start/Cancel indicator light illuminates.

The indicator light of the phase in progress is illuminated.

NOTE: during the running of the programme, it is not possible to change the selection made by positioning the programme selector dial in correspondence of another programme. If you want to change the running washing programme you must cancel the selection made (see "To cancel a washing programme in progress").

Set the "Delay Start" of a programme:

Once the washing programme has been set, press the Delay Start button.

The corresponding indicator light illuminates.

Press the Start/Cancel button, the countdown of the delay start begins automatically.

The indicator lights of the phases turn off.

The opening of the door will not modify or interrupt the countdown.

Once the delay start has elapsed the washing programme will start automatically, the delay start indicator light turns off and the indicator light of the phase in progress illuminates.

To cancel a "Delay Start" in progress

Press the Start/Cancel button for about 5 seconds, the indicator lights of Start/Cancel and Delay Start buttons turn off while the indicator lights of the phases start flashing.

To start the selected washing programme press the Start/Cancel button.

NOTE: the washing programme or the countdown of the delay start will begin only after having pressed the Start/Cancel button. Until that moment it is possible to modify the selection made.

5. To interrupt or cancel a washing programme in progress

Interrupt or cancel a washing programme in progress ONLY if it’s absolutely necessary.

Attention! Hot steam may escape when the door is opened. Open the door carefully.

Interrupt a washing programme in progress

Open the dishwasher door; the programme will stop. Close the door; the programme will start from the point at which it was interrupted.

Cancel a washing programme in progress

Press the Start/Cancel button for about 5 seconds. The Start/Cancel indicator light turns off and the phase indicator lights are flashing.

The running programme has been cancelled and it is now possible to set a new washing programme.

If a new washing programme is to be selected, check that there is detergent in the detergent dispenser.

6. End of the washing programme

The dishwasher will stop automatically.

The illumination of the End indicator light indicates that the programme has ended.

Switch off the dishwasher by returning the programme selector dial to the Off position.

The On-Off indicator light turns off.

Open the dishwasher’s door, leave it ajar and wait a few minutes before removing the dishes; in this way they will be cooler and the drying will be improved.

7. Unloading the dishwasher

Hot dishes are sensitive to knocks. The dishes should therefore be allowed to cool down before removing from the appliance.

Empty the lower basket first and then the upper one; this will avoid water dripping from the upper basket onto the dishes in the lower one.

Water may appear on the sides and the door of the dishwasher as the stainless steel will eventually become cooler than the dishes.

When the washing programme has finished, it is recommended that the dishwasher is unplugged and the water tap turned off.

13

Page 12 Page 14
Image 13
Page 12 Page 14
Contents Dishwasher Contents Installation Safety instructionsChild safety DisposalDescription of the appliance Start/cancel button Delay start buttonWash DrySetting manually Prior to using for the first timeIndicator light Water softenerFilling with dishwasher salt Adjusting the doseRinse aid Filling with rinse aidLoading cutlery and dishes Daily useLower basket Are of limited suitabilityUpper basket Cutlery basketUse of detergent Adjusting the height of the upper basketTo move to the higher position proceed as follows Fill with detergentDetergent tablets Different kinds of detergentConcentrated detergent Use of 3 in 1 combi detergentsWashing programmes Starting a washing programme To interrupt or cancel a washing programme in progressEnd of the washing programme Unloading the dishwasherCleaning the filters Maintenance and cleaningFrost precautions Prolonged periods of non-operationThere are problems when operating the dishwasher Flashing fault code appearsFault code / malfunction Possible cause Solutions Malfunction Possible cause SolutionsWash results are not satisfactory Dishes are not cleanDishes are wet and dull Water drops have dried onto glasses and dishesCustomer Care Department Service and Spare PartsMajor Appliances Standard Guarantee Conditions Guarantee ConditionsEuropean Guarantee ExclusionsFitting under a counter Installation instructionsLevelling Water supply connectionsGreen and Yellow Earth Blue- Neutral Brown- Live Electrical connectionCup racks position a Hints for test centresPage Page From the Electrolux Group. The World’s No.1 choice

ZSF 6066 specifications

The Zanussi ZSF 6066 is a compact, undercounter dishwasher designed to bring efficiency and convenience to any kitchen. With its sleek design and powerful features, this model is ideal for those seeking a reliable appliance that occupies minimal space while delivering superior cleaning results.

One of the standout features of the Zanussi ZSF 6066 is its capacity to accommodate up to 10 place settings. This makes it a great option for small families or those who entertain guests regularly. The flexible basket system allows for easy loading and unloading, meaning you can fit a range of dishware sizes and shapes without hassle. This thoughtful design ensures that larger pots and pans have a designated space, optimizing the interior layout.

Energy efficiency is a key characteristic of the ZSF 6066. It operates using relatively low water and energy consumption, which is not only eco-friendly but also helps reduce utility bills. The Energy Rating is A+, making it a suitable choice for environmentally conscious consumers.

The appliance is equipped with several washing programs tailored to different cleaning needs. These include Eco, Intensive, and Rapid modes, catering to everything from lightly soiled dishes to heavily soiled cookware. The Eco program is particularly notable, as it uses less water and energy without compromising on cleaning performance.

The built-in delay start feature is another highlight, allowing users to set the dishwasher to run at a more convenient time, thus taking advantage of off-peak electricity rates. The ZSF 6066 also incorporates a salt light indicator and rinse aid indicator, providing users with peace of mind regarding maintenance.

Moreover, the noise level of the Zanussi ZSF 6066 is impressively low, operating at just 49 dB. This makes it suitable for open-plan living spaces where minimal disruption is desired.

Safety is paramount in any kitchen appliance, and the ZSF 6066 comes equipped with a child lock feature, ensuring that little ones cannot accidentally access the machine while it's in use.

In summary, the Zanussi ZSF 6066 embodies reliability and practicality, offering efficient cleaning, a variety of wash programs, and user-friendly features. Its compact design and energy-efficient operation make it a smart choice for small homes and apartments, providing the essential functions of a larger dishwasher without taking up excessive space.
Top Page Image Contents